Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Weight |
26.506804mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
12V |
Terminal Pitch |
0.65mm |
Base Part Number |
INA200 |
Function |
Current Monitor |
Output Type |
OPEN-DRAIN |
Number of Channels |
1 |
Max Supply Voltage |
18V |
Min Supply Voltage |
2.7V |
Voltage - Input |
-16V~80V |
Nominal Supply Current |
1.85mA |
Accuracy |
±3.5% |
Response Time |
1300 ns |
Slew Rate |
1 V/μs |
Amplifier Type |
COMPARATOR |
Bandwidth |
500 kHz |
Sensing Method |
High-Side |
Input Offset Voltage-Max |
2500μV |
Length |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
INA200AIDGKRG4 Overview
There is an inclusion of buck boost converter in the package Tape & Reel (TR).8-TSSOP, 8-MSOP (0.118, 3.00mm Width) is the way in which voltage regulator is packaged.The current regulator is mounted by Surface Mount.A maximum operating temperature of -40°C~125°C should not be exceeded during operation.There is a support for voltages of -16V~80V as input voltages for this voltage regulator.An example of this is the 8 termination, which is a procedure in which a transmission line is terminated with a voltage regulator that is equal in impedance to the line characteristics.There are two types of INA200s in this family.Several pronged contacts are used in computer interfaces as 8 pins.The current regulator is mounted on the Surface Mount axis.Providing that it is powered by a 12VV power supply, the constant current should work without any problems.There is a strong/weak growth in the number of channels: 1.The maximum voltage of 18V that can be supplied to the buck boost converter is supported.As a result, these current regulations are included in a part called Operational Amplifier, which consists of these current regulations.A minimum supply voltage of 2.7V is required for its operation.The Amplifier type of this electrical buck boost converter is COMPARATOR.
INA200AIDGKRG4 Features
Tape & Reel (TR) package
INA200 family
The maximal supply voltage of 18V
INA200AIDGKRG4 Applications
There are a lot of Texas Instruments INA200AIDGKRG4 Current Regulation/Managements applications.
- Programmable current source
- Power management
- Smart battery packs
- Over current monitor
- Current sensing
- Automotive current measurement
- Level translating
- Industrial applications current measurement
- Transmission controls
- Engine management