INA200AQDGKRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | INA200 |
| Function | Current Monitor |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 1.85mA |
| Accuracy | ±3.5% |
| Slew Rate | 1 V/us |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 123 dB |
| Unity Gain BW-Nom | 500 kHz |
| Sensing Method | High-Side |
| Input Offset Voltage-Max | 3500μV |
| Voltage Gain-Nom | 20 |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA200AQDGKRQ1 Overview
The package includes buck boost converter in version Tape & Reel (TR).oltage regulator is packaged in such a way that 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) would understand.In this case, Surface Mount holds the current regulator in place.In order to ensure the correct operation of the system, the temperature should not exceed -40°C~125°C.As far as input voltage goes, current regulator supports the value of -16V~80V.An example of this is the 8 termination, which is a procedure in which a transmission line is terminated with a voltage regulator that is equal in impedance to the line characteristics.There are two types of INA200s in this family.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. Using Surface Mount as a mounting system, this current regulator is mounted.It should work as long as it is powered by a 12VV power source. If it does not, it will not work.There is an increase/decrease in the number of channels: 1.The maximum supply voltage of 18V is supported by it.The current regulations of this part are included in a part that is named Operational Amplifier.With the minimum supply voltage of 2.7V, it is able to operate.This type of FPGA is represented by the Automotive, AEC-Q100 series.The amplifier type of this electrical buck boost converter is OPERATIONAL AMPLIFIER, which means that it is an amplifier.
INA200AQDGKRQ1 Features
Tape & Reel (TR) package
INA200 family
The maximal supply voltage of 18V
Automotive, AEC-Q100 series
INA200AQDGKRQ1 Applications
There are a lot of Texas Instruments INA200AQDGKRQ1 Current Regulation/Managements applications.
- Battery management
- Power management
- Over current monitor
- DC-to-dc converters
- Motor controls
- Over-current protection
- Over-current measurement
- Battery chargers
- Power supply current measurement
- DC motor control
