INA201AID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Base Part Number | INA201 |
| Function | Current Monitor |
| Output Type | OPEN-DRAIN |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1.85mA |
| Voltage - Input | -16V~80V |
| Max Supply Current | 1.8mA |
| Accuracy | ±3.5% |
| Response Time | 1300 ns |
| Slew Rate | 1 V/μs |
| Amplifier Type | COMPARATOR |
| Common Mode Rejection Ratio | 80 dB |
| Bandwidth | 300 kHz |
| Unity Gain BW-Nom | 300 kHz |
| Average Bias Current-Max (IIB) | 16μA |
| Bias Current-Max (IIB) @25C | 0.01μA |
| Sensing Method | High-Side |
| Input Offset Voltage-Max | 2500μV |
| Voltage Gain-Nom | 50 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA201AID Overview
Included in package Tube is this file.Voltage regulator is packaged in the way of 8-SOIC (0.154, 3.90mm Width).Mounted by Surface Mount, this current regulator is a semiconductor.There should be a limcurrent regulator to the operating temperature of -40°C~125°C.The input voltage of -16V~80V is supported as an input voltage.The 8 termination is a method for terminating a transmission line by connecting a voltage regulator that matches its characteristic impedance, which is the method of terminating a transmission line with a voltage regulator.This is a member of the INA201 family.Computers and other communication constant current regulators use 8 pins, which are pronged contacts.In this example, the current regulator has been mounted using Surface Mount.Providing that it is powered by a 12VV power supply, the constant current should work without any problems.It supports the maximal supply voltage of 18V.As a result, these current regulations are included in a part called Operational Amplifier, which consists of these current regulations.A minimum supply voltage of 2.7V is required for its operation.This electrical buck boost converter has a COMPARATOR amplifier type.When 1.85mA reaches, it receives its operating supply current.The maximal supply current of 1.8mA makes it feature maximum current regulator's design flexibility.
INA201AID Features
Tube package
INA201 family
The maximal supply voltage of 18V
INA201AID Applications
There are a lot of Texas Instruments INA201AID Current Regulation/Managements applications.
- Engine management
- DC motor control
- Programmable current source
- Power management
- Over-current measurement
- Suspension controls
- Battery management
- Over current monitor
- Current sensing
- Automotive current measurement
