INA201AIDGKT
| Parameters | |
|---|---|
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | INA201 |
| Function | Current Monitor |
| Output Type | OPEN-DRAIN |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1.85mA |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 1.35mA |
| Accuracy | ±3.5% |
| Response Time | 1300 ns |
| Slew Rate | 1 V/μs |
| Amplifier Type | COMPARATOR |
| Common Mode Rejection Ratio | 100 dB |
| Input Offset Voltage (Vos) | 2.5mV |
| Bandwidth | 300 kHz |
| Unity Gain BW-Nom | 300 kHz |
| Sensing Method | High-Side |
| Input Bias Current | 16μA |
| Number of Amplifiers | 1 |
| Voltage Gain-Nom | 50 |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 26.506804mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
INA201AIDGKT Overview
Included in package Tape & Reel (TR) is this file.In the way voltage regulator is packaged, voltage regulator is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).In this case, Surface Mount holds the current regulator in place.As a rule of thumb, the operating temperature should not exceed -40°C~125°C.Current regulator supports the input voltage of -16V~80V.This is a member of the INA201 family.In a computer or other communication constant current regulator, 8 pins are pronged contacts that provide a signal interface.Surface Mount is responsible for mounting this current regulator.If a 12VV power source is used as a power source to power the constant current, it should be able to function.18V's maximum supply voltage can be supported by this buck boost converter.Operational Amplifier is a part that includes these current regulations, all of which are included in one part.A minimum supply voltage of 2.7V is required for its operation.This electrical buck boost converter has a COMPARATOR amplifier type.It reaches 1.85mA when the operating supply current is supplied for its operation.
INA201AIDGKT Features
Tape & Reel (TR) package
INA201 family
The maximal supply voltage of 18V
INA201AIDGKT Applications
There are a lot of Texas Instruments INA201AIDGKT Current Regulation/Managements applications.
- Transmission controls
- Battery chargers
- Over-current measurement
- Industrial applications current measurement
- Programmable current source
- Over-current protection
- Engine management
- Level translating
- Vehicle dynamic controls
- Automotive current measurement
