Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Weight |
129.387224mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
12V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
INA203 |
Function |
Current Monitor |
Qualification Status |
Not Qualified |
Output Type |
OPEN-DRAIN |
Number of Channels |
2 |
Max Supply Voltage |
18V |
Min Supply Voltage |
2.7V |
Voltage - Input |
-16V~80V |
Nominal Supply Current |
2.8mA |
Current - Output |
1mA |
Accuracy |
±3.5% |
Response Time |
1300 ns |
Slew Rate |
1 V/μs |
Amplifier Type |
COMPARATOR |
Bandwidth |
500 kHz |
Average Bias Current-Max (IIB) |
0.015μA |
Bias Current-Max (IIB) @25C |
16μA |
Sensing Method |
High-Side |
Common-mode Reject Ratio-Min |
100 dB |
Voltage Gain-Nom |
20 |
Common Mode Voltage-Max |
80V |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.91mm |
Thickness |
1.58mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
INA203AID Overview
Buck boost converter is embedded in the Tube package.oltage regulator is packaged in such a way that 14-SOIC (0.154, 3.90mm Width) would understand.Current regulator is mounted by Surface Mount.As a rule of thumb, the operating temperature should not exceed -40°C~125°C.As an input voltage, you will be able to input a voltage equal to -16V~80V.In the case of 14 terminations, which are the practice of terminating a transmission line with a voltage regulator that has the same characteristic impedance as the line itself, they are fairly common.In the INA203 family, current regulator is a member.In a computer or other communication constant current regulator, 14 pins are pronged contacts that provide a signal interface.An current regulator such as this one is mounted by Surface Mount.In order for the constant current to work, it should be powered by a 12VV power source, which is found in most 12VV power supplies.With its high output current, 1mA is capable of offering maximum design flexibility.Compared to the last few years, the number of channels has grown strong/weak: 2.It supports the maximal supply voltage of 18V.Operational Amplifier is a part that includes these current regulations, all of which are included in one part.In order for it to operate, 2.7V has to be the minimum supply voltage.This electrical buck boost converter has a COMPARATOR amplifier type.
INA203AID Features
Tube package
INA203 family
The maximal supply voltage of 18V
INA203AID Applications
There are a lot of Texas Instruments INA203AID Current Regulation/Managements applications.
- Diesel injection controls
- Power management
- Battery management
- Smart battery packs
- Industrial applications current measurement
- Vehicle dynamic controls
- DC-to-dc converters
- Battery chargers
- DC motor control
- Over current monitor