Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Weight |
57.209338mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
12V |
Base Part Number |
INA203 |
Function |
Current Monitor |
Output Type |
OPEN-DRAIN |
Number of Channels |
2 |
Max Supply Voltage |
18V |
Min Supply Voltage |
2.7V |
Voltage - Input |
-16V~80V |
Nominal Supply Current |
2.8mA |
Current - Output |
1mA |
Accuracy |
±3.5% |
Response Time |
1300 ns |
Slew Rate |
1 V/μs |
Amplifier Type |
COMPARATOR |
Bandwidth |
500 kHz |
Average Bias Current-Max (IIB) |
0.015μA |
Bias Current-Max (IIB) @25C |
16μA |
Sensing Method |
High-Side |
Common-mode Reject Ratio-Min |
100 dB |
Voltage Gain-Nom |
20 |
Common Mode Voltage-Max |
80V |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
INA203AIPW Overview
Buck boost converter is part of the package Tube.In the way voltage regulator is packaged, voltage regulator is in the form of a 14-TSSOP (0.173, 4.40mm Width).The current regulator is mounted by Surface Mount.As a rule of thumb, the operating temperature should not exceed -40°C~125°C.Voltages of -16V~80V can be input as input voltages in this module.A 14 termination is a method of terminating a transmission line, in which a voltage regulator is used that matches the impedance of the transmission line in order to terminate the line with a 14 termination.INA203 family is associated with current regulator.14-pins are pronged contacts that form part of a computer's or other constant current regulator's signal interface.It is mounted on a Surface Mount-axis by this current regulator.As long as the constant current is powered by a 12VV power source, it should work as long as it is plugged in.As a result of 1mA's output current, it is one of the most flexible power converters available.A significant number of channels are growing strongly/weakly: 2.As long as 18V is supplied with the maximum voltage, it is supported.Part Operational Amplifier consists of these current regulations as well as other current regulations.It operates with the minimal supply voltage of 2.7V.This electrical buck boost converter is an amplifier of type COMPARATOR.
INA203AIPW Features
Tube package
INA203 family
The maximal supply voltage of 18V
INA203AIPW Applications
There are a lot of Texas Instruments INA203AIPW Current Regulation/Managements applications.
- DC-to-dc converters
- DC motor control
- Power supply current measurement
- Power management
- Current sensing
- Engine management
- Suspension controls
- Transmission controls
- Motor controls
- Industrial applications current measurement