INA203AIPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Base Part Number | INA203 |
| Function | Current Monitor |
| Output Type | OPEN-DRAIN |
| Number of Channels | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 2.8mA |
| Current - Output | 1mA |
| Accuracy | ±3.5% |
| Response Time | 1300 ns |
| Slew Rate | 1 V/μs |
| Amplifier Type | COMPARATOR |
| Bandwidth | 500 kHz |
| Average Bias Current-Max (IIB) | 0.015μA |
| Bias Current-Max (IIB) @25C | 16μA |
| Sensing Method | High-Side |
| Common-mode Reject Ratio-Min | 100 dB |
| Voltage Gain-Nom | 20 |
| Common Mode Voltage-Max | 80V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA203AIPWR Overview
Buck boost converter is included in the package Tape & Reel (TR).In this case, voltage regulator has been packaged in the same way as 14-TSSOP (0.173, 4.40mm Width).Surface Mount mounts this current regulator.In order to ensure the correct operation of the system, the temperature should not exceed -40°C~125°C.The input voltage of -16V~80V can be supported by this voltage regulator.14 terminations are a standard way of terminating transmission lines, in which a voltage regulator is used that matches the characteristic impedance of the line in order to terminate the transmission line.INA203 family is associated with current regulator.Several pronged contacts are used in computer interfaces as 14 pins.Using Surface Mount as a mounting system, this current regulator is mounted.Providing that it is powered by a 12VV power supply, the constant current should work without any problems.The output current of 1mA makes it feature maximum design flexibility.Compared to the last few years, the number of channels has grown strong/weak: 2.The maximum voltage of 18V that can be supplied to the buck boost converter is supported.There are several current regulations that are included in the Operational Amplifier part, which is part of the entire assembly.With the minimal supply voltage of 2.7V, it is capable of operating.Amplifier type COMPARATOR can be found on this electrical buck boost converter.
INA203AIPWR Features
Tape & Reel (TR) package
INA203 family
The maximal supply voltage of 18V
INA203AIPWR Applications
There are a lot of Texas Instruments INA203AIPWR Current Regulation/Managements applications.
- Current sensing
- DC-to-dc converters
- Battery management
- Engine management
- Automotive current measurement
- Smart battery packs
- Over-current measurement
- Over current monitor
- Power supply current measurement
- Motor controls
