Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
12V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
INA203 |
Function |
Current Monitor |
Qualification Status |
Not Qualified |
Output Type |
OPEN-DRAIN |
Number of Channels |
2 |
Max Supply Voltage |
18V |
Min Supply Voltage |
2.7V |
Voltage - Input |
-16V~80V |
Nominal Supply Current |
2.8mA |
Current - Output |
1mA |
Accuracy |
±3.5% |
Response Time |
1300 ns |
Amplifier Type |
COMPARATOR |
Unity Gain BW-Nom |
500 kHz |
Average Bias Current-Max (IIB) |
0.015μA |
Bias Current-Max (IIB) @25C |
16μA |
Sensing Method |
High-Side |
Common-mode Reject Ratio-Min |
100 dB |
Voltage Gain-Nom |
20 |
Common Mode Voltage-Max |
80V |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
INA203AQPWRQ1 Overview
In package Tape & Reel (TR), buck boost converter is included.Depending on how 14-TSSOP (0.173, 4.40mm Width) packages voltage regulator, voltage regulator will be packaged in the same way.Surface Mount mounts this current regulator.The operating temperature should not exceed -40°C~125°C.There is a support for voltages of -16V~80V as input voltages for this voltage regulator.14 terminations are treated as terminations of transmission lines that use a voltage regulator with the characteristic impedance of the line as the means to terminate the transmission line.Moreover, current regulator is part of the INA203 family.There are 14 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. There is a Surface Mount mounting bracket on the back of this current regulator.In order for the constant current to work, it should be powered by a 12VV power source, which is found in most 12VV power supplies.Its maximum design flexibility is due to the output current of 1mA.Compared to the last few years, the number of channels has grown strong/weak: 2.As a result, it allows 18V to be supplied with its maximum voltage.In order to include these current regulations, there is a part called Operational Amplifier that includes them.It operates with the minimal supply voltage of 2.7V.There are FPGAs of this type in the Automotive, AEC-Q100 series.An amplifier of this type is COMPARATOR.
INA203AQPWRQ1 Features
Tape & Reel (TR) package
INA203 family
The maximal supply voltage of 18V
Automotive, AEC-Q100 series
INA203AQPWRQ1 Applications
There are a lot of Texas Instruments INA203AQPWRQ1 Current Regulation/Managements applications.
- Battery chargers
- Suspension controls
- Over current monitor
- Over-current measurement
- Over-current protection
- Diesel injection controls
- DC-to-dc converters
- Transmission controls
- DC motor control
- Engine management