INA204AID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | INA204 |
| Function | Current Monitor |
| Qualification Status | Not Qualified |
| Output Type | OPEN-DRAIN |
| Power Supplies | 12V |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 2.8mA |
| Current - Output | 1mA |
| Accuracy | ±3.5% |
| Response Time | 1300 ns |
| Slew Rate | 1 V/μs |
| Amplifier Type | COMPARATOR |
| Bandwidth | 300 kHz |
| Unity Gain BW-Nom | 300 kHz |
| Average Bias Current-Max (IIB) | 0.015μA |
| Bias Current-Max (IIB) @25C | 16μA |
| Sensing Method | High-Side |
| Input Offset Voltage-Max | 2500μV |
| Common-mode Reject Ratio-Min | 100 dB |
| Voltage Gain-Nom | 50 |
| Common Mode Voltage-Max | 80V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA204AID Overview
In package Tube, buck boost converter is included.A package in the way of 14-SOIC (0.154, 3.90mm Width) is used for voltage regulator.A mounting hole is provided for Surface Mount to mount this current regulator.There should be no temperature above -40°C~125°C at the time of operation.Voltages of -16V~80V can be input as input voltages in this module.As well as 14 terminations, there are also 14 terminations, which are the practice of terminating a transmission line with a voltage regulator that matches the characteristic impedance of the transmission line.Moreover, current regulator is part of the INA204 family.Computers and other communication constant current regulators use 14 pins, which are pronged contacts.Surface Mount is responsible for mounting this current regulator.If a 12VV power source is used as a power source to power the constant current, it should be able to function.In addition to the maximum design flexibility that 1mA provides, its output current is also quite high.It supports the maximal supply voltage of 18V.The current regulations of this part are included in a part that is named Operational Amplifier.As a result, it operates at the minimal supply voltage of 2.7V.An amplifying buck boost converter such as this one is a COMPARATOR type amplifying buck boost converter.Current regulation operates from 12V power supplies.
INA204AID Features
Tube package
INA204 family
The maximal supply voltage of 18V
12V power supplies
INA204AID Applications
There are a lot of Texas Instruments INA204AID Current Regulation/Managements applications.
- Automotive current measurement
- Power supply current measurement
- Transmission controls
- Over-current protection
- Industrial applications current measurement
- Programmable current source
- Smart battery packs
- Battery management
- Diesel injection controls
- Over current monitor
