INA204AIPW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | INA204 |
| Function | Current Monitor |
| Output Type | OPEN-DRAIN |
| Power Supplies | 12V |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 2.8mA |
| Current - Output | 1mA |
| Accuracy | ±3.5% |
| Response Time | 1300 ns |
| Slew Rate | 1 V/μs |
| Amplifier Type | COMPARATOR |
| Bandwidth | 300 kHz |
| Average Bias Current-Max (IIB) | 0.015μA |
| Bias Current-Max (IIB) @25C | 16μA |
| Sensing Method | High-Side |
| Input Offset Voltage-Max | 2500μV |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA204AIPW Overview
In package Tube, buck boost converter is included.In the way voltage regulator is packaged, voltage regulator is in the form of a 14-TSSOP (0.173, 4.40mm Width).This electronic part is mounted in the way of Surface Mount.The operating temperature should not exceed -40°C~125°C.Current regulator is possible to use a voltage input of -16V~80V for the input.14 terminations are treated as terminations of transmission lines that use a voltage regulator with the characteristic impedance of the line as the means to terminate the transmission line.As part of the INA204 family, current regulator belongs to this class.Several pronged contacts are used in computer interfaces as 14 pins.Surface Mount is responsible for mounting this current regulator.There is no reason why the constant current cannot work as long as it is powered by a 12VV power source.The output current of 1mA makes it a very flexible power converter when it comes to design.It supports the maximal supply voltage of 18V.Operational Amplifier, which is a part that contains all of these current regulations, is included in this part.This buck boost converter is designed to operate with a minimal supply voltage of 2.7V as its input voltage.An amplifying buck boost converter such as this one is a COMPARATOR type amplifying buck boost converter.12V power supplies are required to operate current regulation.
INA204AIPW Features
Tube package
INA204 family
The maximal supply voltage of 18V
12V power supplies
INA204AIPW Applications
There are a lot of Texas Instruments INA204AIPW Current Regulation/Managements applications.
- Over-current protection
- Automotive current measurement
- DC motor control
- Programmable current source
- Current sensing
- Over-current measurement
- Industrial applications current measurement
- Power supply current measurement
- Power management
- Over current monitor
