banner_page

INA205AID

14 Terminations12V 14 Pin INA205 Current regulator-40°C~125°C Min 2.7V Max 18V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-INA205AID
  • Package: 14-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 201
  • Description: 14 Terminations12V 14 Pin INA205 Current regulator-40°C~125°C Min 2.7V Max 18V (Kg)

Details

Tags

Parameters
Peak Reflow Temperature (Cel) 260
Supply Voltage 12V
Terminal Pitch 1.27mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number INA205
Function Current Monitor
Qualification Status Not Qualified
Output Type OPEN-DRAIN
Power Supplies 12V
Max Supply Voltage 18V
Min Supply Voltage 2.7V
Voltage - Input -16V~80V
Nominal Supply Current 2.8mA
Current - Output 1mA
Accuracy ±3.5%
Response Time 1300 ns
Slew Rate 1 V/μs
Amplifier Type COMPARATOR
Bandwidth 200 kHz
Average Bias Current-Max (IIB) 0.015μA
Bias Current-Max (IIB) @25C 16μA
Sensing Method High-Side
Input Offset Voltage-Max 2500μV
Height 1.75mm
Length 8.65mm
Width 3.91mm
Thickness 1.58mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Number of Pins 14
Weight 129.387224mg
Operating Temperature -40°C~125°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 14
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
HTS Code 8542.39.00.01
Subcategory Operational Amplifier
Terminal Position DUAL
Terminal Form GULL WING

INA205AID Overview


There is an inclusion of buck boost converter in the package Tube.oltage regulator is packaged in such a way that 14-SOIC (0.154, 3.90mm Width) would understand.Surface Mount mounts this current regulator.Current regulator is recommended that the operating temperature not exceed -40°C~125°C.Current regulator is possible to use a voltage of -16V~80V as an input voltage.A 14 termination is a method of terminating a transmission line, in which a voltage regulator is used that matches the impedance of the transmission line in order to terminate the line with a 14 termination.Moreover, current regulator is part of the INA205 family.As part of a signal interface in a computer or other communication constant current regulator, 14 pins are pronged contacts.In this example, the current regulator has been mounted using Surface Mount.In order to make this constant current work, it needs to be powered by 12VV.With its high output current, 1mA is capable of offering maximum design flexibility.The maximum voltage of 18V that can be supplied to the buck boost converter is supported.Operational Amplifier, which is a part that contains all of these current regulations, is included in this part.As long as the supply voltage is lower than 2.7V, it will operate correctly.This electrical buck boost converter has a COMPARATOR amplifier type.A 12V power supply is used to power the boost converter.

INA205AID Features


Tube package
INA205 family
The maximal supply voltage of 18V
12V power supplies

INA205AID Applications


There are a lot of Texas Instruments INA205AID Current Regulation/Managements applications.

  • Diesel injection controls
  • Battery chargers
  • Over current monitor
  • Engine management
  • DC motor control
  • Motor controls
  • Power supply current measurement
  • Transmission controls
  • Power management
  • Current sensing

Write a review

Note: HTML is not translated!
    Bad           Good