INA205AIDGSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Base Part Number | INA205 |
| Function | Current Monitor |
| Output Type | OPEN-DRAIN |
| Power Supplies | 12V |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 2.8mA |
| Current - Output | 1mA |
| Accuracy | ±3.5% |
| Response Time | 1300 ns |
| Slew Rate | 1 V/μs |
| Amplifier Type | COMPARATOR |
| Bandwidth | 200 kHz |
| Average Bias Current-Max (IIB) | 0.015μA |
| Sensing Method | High-Side |
| Input Offset Voltage-Max | 2500μV |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA205AIDGSR Overview
There is an inclusion of buck boost converter in the package Tape & Reel (TR).In this case, voltage regulator has been packaged in the same way as 10-TFSOP, 10-MSOP (0.118, 3.00mm Width).In this case, Surface Mount holds the current regulator in place.Temperatures should not exceed -40°C~125°C during operation.Current regulator is possible to use a voltage input of -16V~80V for the input.As well as 10 terminations, there are also 10 terminations, which are the practice of terminating a transmission line with a voltage regulator that matches the characteristic impedance of the transmission line.In the INA205 family, current regulator is a member.Several pronged contacts are used in computer interfaces as 10 pins.Surface Mount is responsible for mounting this current regulator.Providing the constant current is powered by a 12VV power source, the constant current should be able to function.The output current of 1mA makes it a very flexible power converter when it comes to design.It supports the maximal supply voltage of 18V.This part is included in Operational Amplifier.As a result, it operates at the minimal supply voltage of 2.7V.The amplifier type of this electrical buck boost converter is COMPARATOR, which means that it is an amplifier.12V power supplies provide power to the boost converter.
INA205AIDGSR Features
Tape & Reel (TR) package
INA205 family
The maximal supply voltage of 18V
12V power supplies
INA205AIDGSR Applications
There are a lot of Texas Instruments INA205AIDGSR Current Regulation/Managements applications.
- Current sensing
- Battery chargers
- Power management
- Automotive current measurement
- Power supply current measurement
- Motor controls
- Over current monitor
- DC motor control
- DC-to-dc converters
- Vehicle dynamic controls
