INA205AIDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Base Part Number | INA205 |
| Function | Current Monitor |
| Output Type | OPEN-DRAIN |
| Power Supplies | 12V |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 2.8mA |
| Current - Output | 1mA |
| Accuracy | ±3.5% |
| Response Time | 1300 ns |
| Slew Rate | 1 V/μs |
| Amplifier Type | COMPARATOR |
| Bandwidth | 200 kHz |
| Average Bias Current-Max (IIB) | 0.015μA |
| Bias Current-Max (IIB) @25C | 16μA |
| Sensing Method | High-Side |
| Input Offset Voltage-Max | 2500μV |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA205AIDR Overview
Including buck boost converter in package Tape & Reel (TR) is a good idea.In the way voltage regulator is packaged, voltage regulator is in the form of a 14-SOIC (0.154, 3.90mm Width).The current regulator is mounted by Surface Mount.In order to ensure the correct operation of the system, the temperature should not exceed -40°C~125°C.There is a support for voltages of -16V~80V as input voltages for this voltage regulator.An example of this is the 14 termination, which is a procedure in which a transmission line is terminated with a voltage regulator that is equal in impedance to the line characteristics.As part of the INA205 family, current regulator belongs to this class.There are 14 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. The current regulator is mounted on the Surface Mount axis.If a 12VV power source is used as a power source to power the constant current, it should be able to function.Its maximum design flexibility is due to the output current of 1mA.There is a maximum voltage to be supplied to 18V by it.As a result, these current regulations are included in a part called Operational Amplifier, which consists of these current regulations.With the minimum supply voltage of 2.7V, it is able to operate.This electrical buck boost converter is an amplifier of type COMPARATOR.Power is provided by 12V power supplies.
INA205AIDR Features
Tape & Reel (TR) package
INA205 family
The maximal supply voltage of 18V
12V power supplies
INA205AIDR Applications
There are a lot of Texas Instruments INA205AIDR Current Regulation/Managements applications.
- Transmission controls
- Smart battery packs
- Industrial applications current measurement
- Diesel injection controls
- Over-current measurement
- Current sensing
- Over current monitor
- Motor controls
- Automotive current measurement
- Battery management
