INA205AIPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | INA205 |
| Function | Current Monitor |
| Qualification Status | Not Qualified |
| Output Type | OPEN-DRAIN |
| Power Supplies | 12V |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 2.8mA |
| Current - Output | 1mA |
| Accuracy | ±3.5% |
| Response Time | 1300 ns |
| Slew Rate | 1 V/μs |
| Amplifier Type | COMPARATOR |
| Bandwidth | 200 kHz |
| Average Bias Current-Max (IIB) | 0.015μA |
| Bias Current-Max (IIB) @25C | 16μA |
| Sensing Method | High-Side |
| Input Offset Voltage-Max | 2500μV |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA205AIPWR Overview
There is a package called Tape & Reel (TR) that contains buck boost converter.In the way voltage regulator is packaged, voltage regulator is in the form of a 14-TSSOP (0.173, 4.40mm Width).Current regulator is mounted by Surface Mount.As a rule of thumb, the operating temperature should not exceed -40°C~125°C.Current regulator is possible to use a voltage of -16V~80V as an input voltage.A 14 termination can be defined as a terminating voltage regulator which matches the characteristic impedance of a line, which allows a transmission line to be terminated with a voltage regulator matching its characteristic impedance.Among the INA205 family of products.There are 14 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. There is a Surface Mount mounting bracket on the back of this current regulator.As long as the constant current is powered by a 12VV power source, it should work as long as it is plugged in.As a result of 1mA's output current, it offers maximum design flexibility.There is a maximum voltage to be supplied to 18V by it.Operational Amplifier, which is a part that contains all of these current regulations, is included in this part.As a result, it operates at the minimal supply voltage of 2.7V.This electrical buck boost converter uses a COMPARATOR amplifier type.The system is powered by 12V power supplies.
INA205AIPWR Features
Tape & Reel (TR) package
INA205 family
The maximal supply voltage of 18V
12V power supplies
INA205AIPWR Applications
There are a lot of Texas Instruments INA205AIPWR Current Regulation/Managements applications.
- Industrial applications current measurement
- Over-current protection
- Diesel injection controls
- DC-to-dc converters
- Smart battery packs
- Engine management
- Over current monitor
- Vehicle dynamic controls
- DC motor control
- Motor controls
