INA206AID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Base Part Number | INA206 |
| Function | Current Monitor |
| Output Type | OPEN-DRAIN |
| Number of Channels | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 2.8mA |
| Voltage - Input | -16V~80V |
| Current - Output | 1mA |
| Accuracy | ±3.5% |
| Response Time | 1300 ns |
| Slew Rate | 1 V/μs |
| Amplifier Type | COMPARATOR |
| Common Mode Rejection Ratio | 100 dB |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 500 kHz |
| Sensing Method | High-Side |
| Input Bias Current | 9μA |
| Number of Amplifiers | 1 |
| Voltage Gain-Nom | 20 |
| Common Mode Voltage-Max | 80V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA206AID Overview
Buck boost converter is embedded in the Tube package.Depending on how 14-SOIC (0.154, 3.90mm Width) packages voltage regulator, voltage regulator will be packaged in the same way.The current regulator is mounted by Surface Mount.As a rule of thumb, the operating temperature should not exceed -40°C~125°C.The input voltage of -16V~80V is supported as an input voltage.INA206 family is associated with current regulator.When a computer or other communication constant current regulator has 14 pins, these are pronged contacts.Surface Mount is responsible for mounting this current regulator.Providing that it is powered by a 12VV power supply, the constant current should work without any problems.With its high output current, 1mA is capable of offering maximum design flexibility.The number of channels is growing both strongly and weakly: 2.As a result, it allows 18V to be supplied with its maximum voltage.Operational Amplifier, which is a part that contains all of these current regulations, is included in this part.With the minimum supply voltage of 2.7V, it is able to operate.Amplifier type COMPARATOR can be found on this electrical buck boost converter.2.8mA is the operating supply current provided for its operation.
INA206AID Features
Tube package
INA206 family
The maximal supply voltage of 18V
INA206AID Applications
There are a lot of Texas Instruments INA206AID Current Regulation/Managements applications.
- Over current monitor
- Over-current protection
- Battery management
- Over current monitor
- DC-to-dc converters
- Suspension controls
- Power supply current measurement
- Industrial applications current measurement
- Vehicle dynamic controls
- DC motor control
