INA206AIPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 11 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Base Part Number | INA206 |
| Function | Current Monitor |
| Output Type | OPEN-DRAIN |
| Number of Channels | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 2.8mA |
| Voltage - Input | -16V~80V |
| Max Supply Current | 2.2mA |
| Current - Output | 1mA |
| Accuracy | ±3.5% |
| Response Time | 1300 ns |
| Slew Rate | 1 V/μs |
| Amplifier Type | COMPARATOR |
| Common Mode Rejection Ratio | 80 dB |
| Bandwidth | 500 kHz |
| Average Bias Current-Max (IIB) | 16μA |
| Bias Current-Max (IIB) @25C | 0.01μA |
| Sensing Method | High-Side |
| Voltage Gain-Nom | 20 |
| Common Mode Voltage-Max | 80V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA206AIPW Overview
Including buck boost converter in package Tube is a good idea.A package in the way of 14-TSSOP (0.173, 4.40mm Width) is used for voltage regulator.Surface Mount mounts this current regulator.In order to maintain a safe operating environment, the temperature cannot exceed -40°C~125°C.The input voltage of -16V~80V can be supported by this voltage regulator.The 14 termination is a method for terminating a transmission line by connecting a voltage regulator that matches its characteristic impedance, which is the method of terminating a transmission line with a voltage regulator.Moreover, current regulator is part of the INA206 family.There are 14 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. There is a Surface Mount mounting bracket on the back of this current regulator.It should work as long as it is powered by a 12VV power source. If it does not, it will not work.Taking into account the output current of 1mA, it is able to provide maximum design flexibility for the designer.Compared to the last few years, the number of channels has grown strong/weak: 2.As long as 18V is supplied with the maximum voltage, it is supported.In this case, these current regulations are included as part of a part called Operational Amplifier.It operates with the minimal supply voltage of 2.7V.This electrical buck boost converter uses a COMPARATOR amplifier type.2.8mA represents the operating supply current supplied for its operation.As a result of the maximum supply current of 2.2mA, maximum current regulator's design flexibility is possible.
INA206AIPW Features
Tube package
INA206 family
The maximal supply voltage of 18V
INA206AIPW Applications
There are a lot of Texas Instruments INA206AIPW Current Regulation/Managements applications.
- DC-to-dc converters
- Transmission controls
- Automotive current measurement
- Battery chargers
- Engine management
- Power supply current measurement
- Over current monitor
- Battery management
- Smart battery packs
- DC motor control
