INA206AIPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 10 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Base Part Number | INA206 |
| Function | Current Monitor |
| Output Type | OPEN-DRAIN |
| Number of Channels | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 2.8mA |
| Current - Output | 1mA |
| Accuracy | ±3.5% |
| Response Time | 1300 ns |
| Slew Rate | 1 V/μs |
| Amplifier Type | COMPARATOR |
| Bandwidth | 500 kHz |
| Average Bias Current-Max (IIB) | 16μA |
| Bias Current-Max (IIB) @25C | 0.01μA |
| Sensing Method | High-Side |
| Common-mode Reject Ratio-Min | 100 dB |
| Voltage Gain-Nom | 20 |
| Common Mode Voltage-Max | 80V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA206AIPWR Overview
Buck boost converter is included in the package Tape & Reel (TR).Voltage regulator is packaged in the way of 14-TSSOP (0.173, 4.40mm Width).There is a Surface Mount mounted on this current regulator.As a rule of thumb, the operating temperature should not exceed -40°C~125°C.There is a support for voltages of -16V~80V as input voltages for this voltage regulator.A 14 termination can be defined as a terminating voltage regulator which matches the characteristic impedance of a line, which allows a transmission line to be terminated with a voltage regulator matching its characteristic impedance.There are two types of INA206s in this family.There are 14 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. The current regulator is mounted on the Surface Mount axis.In order for the constant current to work, it should be powered by a 12VV power source, which is found in most 12VV power supplies.As a result of 1mA's output current, it is one of the most flexible power converters available.In terms of channel number, I would say that it is growing strongly/weakly: 2.Supports the maximum supply voltage of 18V.Operational Amplifier, which is a part that contains all of these current regulations, is included in this part.With the minimal supply voltage of 2.7V, it is capable of operating.It has an Amplifier type of COMPARATOR.
INA206AIPWR Features
Tape & Reel (TR) package
INA206 family
The maximal supply voltage of 18V
INA206AIPWR Applications
There are a lot of Texas Instruments INA206AIPWR Current Regulation/Managements applications.
- Over-current measurement
- Battery management
- Diesel injection controls
- Over current monitor
- Suspension controls
- Motor controls
- DC motor control
- DC-to-dc converters
- Current sensing
- Programmable current source
