INA207AIDGSRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Base Part Number | INA207 |
| Function | Current Monitor |
| Output Type | OPEN-DRAIN |
| Power Supplies | 12V |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 2.8mA |
| Current - Output | 1mA |
| Accuracy | ±3.5% |
| Response Time | 1300 ns |
| Slew Rate | 1 V/μs |
| Amplifier Type | COMPARATOR |
| Bandwidth | 300 kHz |
| Average Bias Current-Max (IIB) | 16μA |
| Bias Current-Max (IIB) @25C | 0.01μA |
| Sensing Method | High-Side |
| Input Offset Voltage-Max | 2500μV |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA207AIDGSRG4 Overview
In package Tape & Reel (TR), buck boost converter is included.A package in the way of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) is used for voltage regulator.The current regulator is mounted by Surface Mount.Temperatures should not exceed -40°C~125°C during operation.Current regulator is possible to use a voltage input of -16V~80V for the input.A 10 termination can be defined as a terminating voltage regulator which matches the characteristic impedance of a line, which allows a transmission line to be terminated with a voltage regulator matching its characteristic impedance.This is a member of the INA207 family.Computers or other communication constant current regulators have 10 pins, which are pronged contacts.There is a Surface Mount mounting bracket on the back of this current regulator.There is no reason why the constant current cannot work as long as it is powered by a 12VV power source.The output current of 1mA makes it a very flexible power converter when it comes to design.18V's maximum supply voltage can be supported by this buck boost converter.Operational Amplifier is a part that includes these current regulations, all of which are included in one part.As long as the supply voltage is lower than 2.7V, it will operate correctly.An amplifying buck boost converter such as this one is a COMPARATOR type amplifying buck boost converter.A power supply 12V is required to operate current regulation.
INA207AIDGSRG4 Features
Tape & Reel (TR) package
INA207 family
The maximal supply voltage of 18V
12V power supplies
INA207AIDGSRG4 Applications
There are a lot of Texas Instruments INA207AIDGSRG4 Current Regulation/Managements applications.
- Over current monitor
- Battery management
- Automotive current measurement
- Transmission controls
- Suspension controls
- Current sensing
- Vehicle dynamic controls
- Battery chargers
- Level translating
- Engine management
