Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
Number of Pins |
10 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
HTS Code |
8542.39.00.01 |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
12V |
Terminal Pitch |
0.5mm |
Base Part Number |
INA207 |
Function |
Current Monitor |
Output Type |
OPEN-DRAIN |
Power Supplies |
12V |
Max Supply Voltage |
18V |
Min Supply Voltage |
2.7V |
Voltage - Input |
-16V~80V |
Nominal Supply Current |
2.8mA |
Current - Output |
1mA |
Accuracy |
±3.5% |
Response Time |
1300 ns |
Slew Rate |
1 V/μs |
Amplifier Type |
COMPARATOR |
Bandwidth |
300 kHz |
Average Bias Current-Max (IIB) |
16μA |
Bias Current-Max (IIB) @25C |
0.01μA |
Sensing Method |
High-Side |
Input Offset Voltage-Max |
2500μV |
Height Seated (Max) |
1.1mm |
Length |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
INA207AIDGSTG4 Overview
There is an inclusion of buck boost converter in the package Tape & Reel (TR).The package is in the form of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width).A mounting hole is provided for Surface Mount to mount this current regulator.Current regulator is recommended that the operating temperature not exceed -40°C~125°C.Current regulator is possible to use a voltage input of -16V~80V for the input.The 10 termination is a method for terminating a transmission line by connecting a voltage regulator that matches its characteristic impedance, which is the method of terminating a transmission line with a voltage regulator.There is a INA207 family member who is related to current regulator.Computers and other communication constant current regulators use 10 pins, which are pronged contacts.The current regulator is mounted on the Surface Mount axis.The constant current should work as long as it is powered by a 12VV power source, and therefore must be plugged into a 12VV outlet.In addition to the maximum design flexibility that 1mA provides, its output current is also quite high.A maximum supply voltage of 18V can be supported by it.There is a part called Operational Amplifier which contains all of these current regulations.In order for it to operate, 2.7V has to be the minimum supply voltage.This electrical buck boost converter has a COMPARATOR amplifier type.In order for current regulation to operate, current regulation requires 12V power supplies.
INA207AIDGSTG4 Features
Tape & Reel (TR) package
INA207 family
The maximal supply voltage of 18V
12V power supplies
INA207AIDGSTG4 Applications
There are a lot of Texas Instruments INA207AIDGSTG4 Current Regulation/Managements applications.
- Industrial applications current measurement
- Power supply current measurement
- Over-current measurement
- Diesel injection controls
- Engine management
- Automotive current measurement
- Vehicle dynamic controls
- Suspension controls
- Smart battery packs
- Battery management