INA207AIDRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Base Part Number | INA207 |
| Function | Current Monitor |
| Output Type | OPEN-DRAIN |
| Power Supplies | 12V |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 1.8mA |
| Current - Output | 1mA |
| Accuracy | ±3.5% |
| Response Time | 1300 ns |
| Slew Rate | 1 V/μs |
| Amplifier Type | COMPARATOR |
| Bandwidth | 300 kHz |
| Average Bias Current-Max (IIB) | 16μA |
| Supply Voltage Limit-Max | 18V |
| Sensing Method | High-Side |
| Input Offset Voltage-Max | 2500μV |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
INA207AIDRG4 Overview
In package Tape & Reel (TR), buck boost converter is included.Voltage regulator is packaged in the way of 14-SOIC (0.154, 3.90mm Width).Surface Mount is used to mount this current regulator on the board.A maximum operating temperature of -40°C~125°C should not be exceeded during operation.The input voltage of -16V~80V can be supported by this voltage regulator.An example of this is the 14 termination, which is a procedure in which a transmission line is terminated with a voltage regulator that is equal in impedance to the line characteristics.Current regulator belongs to the family INA207.Several pronged contacts are used in computer interfaces as 14 pins.An current regulator such as this one is mounted by Surface Mount.It should work as long as it is powered by a 12VV power source. If it does not, it will not work.With its high output current, 1mA is capable of offering maximum design flexibility.Operational Amplifier is a part that includes these current regulations, all of which are included in one part.The amplifier type of this electrical buck boost converter is COMPARATOR, which means that it is an amplifier.In order for current regulation to operate, current regulation requires 12V power supplies.
INA207AIDRG4 Features
Tape & Reel (TR) package
INA207 family
12V power supplies
INA207AIDRG4 Applications
There are a lot of Texas Instruments INA207AIDRG4 Current Regulation/Managements applications.
- Level translating
- Automotive current measurement
- DC motor control
- Suspension controls
- Over-current measurement
- Battery management
- Vehicle dynamic controls
- Transmission controls
- DC-to-dc converters
- Over-current protection
