INA207AIPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Base Part Number | INA207 |
| Function | Current Monitor |
| Output Type | OPEN-DRAIN |
| Power Supplies | 12V |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 2.8mA |
| Current - Output | 1mA |
| Accuracy | ±3.5% |
| Response Time | 1300 ns |
| Slew Rate | 1 V/μs |
| Amplifier Type | COMPARATOR |
| Bandwidth | 300 kHz |
| Average Bias Current-Max (IIB) | 16μA |
| Bias Current-Max (IIB) @25C | 0.01μA |
| Sensing Method | High-Side |
| Input Offset Voltage-Max | 2500μV |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA207AIPWR Overview
The package includes buck boost converter in version Tape & Reel (TR).In the way voltage regulator is packaged, voltage regulator is in the form of a 14-TSSOP (0.173, 4.40mm Width).Mounted by Surface Mount, this current regulator is a semiconductor.There should be no temperature above -40°C~125°C at the time of operation.As an input voltage, you will be able to input a voltage equal to -16V~80V.In addition to the 14 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.This is a member of the INA207 family.There are 14 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. This current regulator is mounted by Surface Mount.The constant current should work as long as it is powered by a 12VV power source, and therefore must be plugged into a 12VV outlet.The output current of 1mA makes it feature maximum design flexibility.As long as 18V is supplied with the maximal voltage, the buck boost converter will work.In order to include these current regulations, there is a part called Operational Amplifier that includes them.In order for it to operate, 2.7V has to be the minimum supply voltage.Amplifier type COMPARATOR can be found on this electrical buck boost converter.A 12V power supply is used to power the boost converter.
INA207AIPWR Features
Tape & Reel (TR) package
INA207 family
The maximal supply voltage of 18V
12V power supplies
INA207AIPWR Applications
There are a lot of Texas Instruments INA207AIPWR Current Regulation/Managements applications.
- Power supply current measurement
- Power management
- Transmission controls
- Battery chargers
- Over-current protection
- Diesel injection controls
- Engine management
- Level translating
- Over-current measurement
- Battery management
