INA208AID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Base Part Number | INA208 |
| Function | Current Monitor |
| Output Type | OPEN-DRAIN |
| Operating Supply Voltage | 18V |
| Power Supplies | 12V |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 2.8mA |
| Voltage - Input | -16V~80V |
| Current - Output | 1mA |
| Accuracy | ±3.5% |
| Response Time | 1300 ns |
| Slew Rate | 1 V/μs |
| Amplifier Type | COMPARATOR |
| Bandwidth | 200 kHz |
| Average Bias Current-Max (IIB) | 16μA |
| Bias Current-Max (IIB) @25C | 0.01μA |
| Sensing Method | High-Side |
| Input Offset Voltage-Max | 2500μV |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA208AID Overview
There is a package called Tube that contains buck boost converter.A package in the way of 14-SOIC (0.154, 3.90mm Width) is used for voltage regulator.There is a Surface Mount mounted on this current regulator.The operating temperature should not exceed -40°C~125°C.An input voltage wcurrent regulatorh a value of -16V~80V may be used as an input voltage.14 terminations are a standard way of terminating transmission lines, in which a voltage regulator is used that matches the characteristic impedance of the line in order to terminate the transmission line.There is a INA208 family member who is related to current regulator.As part of a signal interface in a computer or other communication constant current regulator, 14 pins are pronged contacts.This current regulator is mounted by Surface Mount.In order to make this constant current work, it needs to be powered by 12VV.The output current of the 1mA feature allows it to be designed in a way that offers maximum design flexibility.There is a maximum voltage to be supplied to 18V by it.This part is included in Operational Amplifier.It operates with the minimal supply voltage of 2.7V.Amplifier type COMPARATOR can be found on this electrical buck boost converter.2.8mA represents the operating supply current supplied for its operation.Power is provided by a 12V power supply.For optimum efficiency, the supply voltage should be kept at 18V at all times.
INA208AID Features
Tube package
INA208 family
The maximal supply voltage of 18V
12V power supplies
INA208AID Applications
There are a lot of Texas Instruments INA208AID Current Regulation/Managements applications.
- Power supply current measurement
- Vehicle dynamic controls
- Diesel injection controls
- Over current monitor
- Level translating
- Transmission controls
- Motor controls
- Over-current protection
- Smart battery packs
- DC motor control
