INA208AIDG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Base Part Number | INA208 |
| Function | Current Monitor |
| Output Type | OPEN-DRAIN |
| Power Supplies | 12V |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 2.8mA |
| Current - Output | 1mA |
| Accuracy | ±3.5% |
| Response Time | 1300 ns |
| Slew Rate | 1 V/μs |
| Amplifier Type | COMPARATOR |
| Bandwidth | 200 kHz |
| Average Bias Current-Max (IIB) | 16μA |
| Bias Current-Max (IIB) @25C | 0.01μA |
| Sensing Method | High-Side |
| Input Offset Voltage-Max | 2500μV |
| Height | 1.58mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA208AIDG4 Overview
The package includes buck boost converter in version Tube.14-SOIC (0.154, 3.90mm Width) has packaged voltage regulator in this manner.Mounted by Surface Mount is this current regulator.Temperatures should not exceed -40°C~125°C during operation.Current regulator is possible to use a voltage of -16V~80V as an input voltage.In the case of 14 terminations, which are the practice of terminating a transmission line with a voltage regulator that has the same characteristic impedance as the line itself, they are fairly common.There is a INA208 family member who is related to current regulator.There are 14 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. In this example, the current regulator has been mounted using Surface Mount.The constant current should work as long as it is powered by a 12VV power source, and therefore must be plugged into a 12VV outlet.Its maximum design flexibility is due to the output current of 1mA.Supports the maximum supply voltage of 18V.Operational Amplifier, which is a part that contains all of these current regulations, is included in this part.A minimum supply voltage of 2.7V is required for its operation.The Amplifier type of this electrical buck boost converter is COMPARATOR.Power is provided by 12V power supplies.
INA208AIDG4 Features
Tube package
INA208 family
The maximal supply voltage of 18V
12V power supplies
INA208AIDG4 Applications
There are a lot of Texas Instruments INA208AIDG4 Current Regulation/Managements applications.
- Vehicle dynamic controls
- Battery management
- Motor controls
- Programmable current source
- Current sensing
- Over current monitor
- Automotive current measurement
- Power management
- Engine management
- Over current monitor
