INA208AIPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | INA208 |
| Function | Current Monitor |
| Qualification Status | Not Qualified |
| Output Type | OPEN-DRAIN |
| Power Supplies | 12V |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 18V |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 2.8mA |
| Current - Output | 1mA |
| Accuracy | ±3.5% |
| Response Time | 1300 ns |
| Slew Rate | 1 V/μs |
| Amplifier Type | COMPARATOR |
| Bandwidth | 200 kHz |
| Average Bias Current-Max (IIB) | 16μA |
| Bias Current-Max (IIB) @25C | 0.01μA |
| Sensing Method | High-Side |
| Input Offset Voltage-Max | 2500μV |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA208AIPWR Overview
Included in package Tape & Reel (TR) is this file.14-TSSOP (0.173, 4.40mm Width) is the way in which voltage regulator is packaged.Mounted by Surface Mount is this current regulator.As a rule of thumb, the operating temperature should not exceed -40°C~125°C.Current regulator is possible to use a voltage input of -16V~80V for the input.14 terminations are a standard way of terminating transmission lines, in which a voltage regulator is used that matches the characteristic impedance of the line in order to terminate the transmission line.There is a INA208 family member who is related to current regulator.Computers and other communication constant current regulators use 14 pins, which are pronged contacts.It is mounted by Surface Mount on this current regulator.The supply voltage of this electrical constant current is 12V.The output current of the 1mA feature allows it to be designed in a way that offers maximum design flexibility.Supports the maximum supply voltage of 2.7V.This part is included in Operational Amplifier.This buck boost converter is designed to operate with a minimal supply voltage of 18V as its input voltage.This electrical buck boost converter has a COMPARATOR amplifier type.12V power supplies provide power to the boost converter.
INA208AIPWR Features
Tape & Reel (TR) package
INA208 family
The maximal supply voltage of 2.7V
12V power supplies
INA208AIPWR Applications
There are a lot of Texas Instruments INA208AIPWR Current Regulation/Managements applications.
- Engine management
- Over current monitor
- DC-to-dc converters
- Diesel injection controls
- Programmable current source
- Power management
- Motor controls
- Over-current protection
- Power supply current measurement
- Battery management
