banner_page

INA209AIPWG4

16 Terminations3.3V 16 Pin INA209 Current regulator-25°C~85°C Min 3V Max 5.5V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-INA209AIPWG4
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 174
  • Description: 16 Terminations3.3V 16 Pin INA209 Current regulator-25°C~85°C Min 3V Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Weight 61.887009mg
Operating Temperature -25°C~85°C
Packaging Tube
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 16
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Comparator
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 3.3V
Base Part Number INA209
Function Current Monitor
Output Type OPEN-COLLECTOR
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 3V
Voltage - Input 0V~26V
Nominal Supply Current 1mA
Accuracy ±1%
Amplifier Type COMPARATOR
Sensing Method High-Side
Input Offset Voltage-Max 200μV
Height 1.15mm
Length 5mm
Width 4.4mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

INA209AIPWG4 Overview


There is an inclusion of buck boost converter in the package Tube.In this case, voltage regulator has been packaged in the same way as 16-TSSOP (0.173, 4.40mm Width).There is a Surface Mount mounted on this current regulator.Temperatures should not exceed -25°C~85°C during operation.Current regulator is possible to use a voltage input of 0V~26V for the input.In addition to the 16 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.As part of the INA209 family, current regulator belongs to this class.As part of a signal interface in a computer or other communication constant current regulator, 16 pins are pronged contacts.Using Surface Mount as a mounting system, this current regulator is mounted.The constant current should work as long as it is powered by a 3.3VV power source, and therefore must be plugged into a 3.3VV outlet.There is a strong/weak growth in the number of channels: 1.As a result, it allows 5.5V to be supplied with its maximum voltage.Part Comparator consists of these current regulations as well as other current regulations.The buck boost converter operates with a minimum supply voltage of 3V.This electrical buck boost converter has a COMPARATOR amplifier type.

INA209AIPWG4 Features


Tube package
INA209 family
The maximal supply voltage of 5.5V

INA209AIPWG4 Applications


There are a lot of Texas Instruments INA209AIPWG4 Current Regulation/Managements applications.

  • Power supply current measurement
  • Power management
  • Transmission controls
  • DC motor control
  • Diesel injection controls
  • Over-current protection
  • Battery management
  • Suspension controls
  • Over-current measurement
  • Vehicle dynamic controls

Write a review

Note: HTML is not translated!
    Bad           Good