INA2126PG4
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | INA2126 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 4 |
| Number of Circuits | 2 |
| Operating Supply Current | 175μA |
| Nominal Supply Current | 400μA |
| Quiescent Current | 175μA |
| Slew Rate | 0.4V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 83 dB |
| Current - Input Bias | 10nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 200 kHz |
| Gain Bandwidth Product | 200 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Power Supply Rejection Ratio (PSRR) | 106dB |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 100μV |
| -3db Bandwidth | 0.2MHz |
| Dual Supply Voltage | 15V |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Voltage Noise Density | 35nV/sqrt Hz |
| Voltage Gain-Nom | 100 |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
INA2126PG4 Overview
Op amp is packaged in 16-DIP (0.300, 7.62mm) case. Buffer amps of this type are called Instrumentation-types. There is a Tube case that is delivered with the instrumentation amplifiers. It is estimated that there will be at least 16 terminations this year. It consists of a total of 16 pins in total. Please take in mind that op amp should be run at 15V. Linear amplifier includes 16 pins. Regarding input offset voltage, buffer amplifier rates 250μV voltage. Through Hole is the recommended mounting type of operational amplifiers. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. An 175μA volt supply current is needed for this linear amplifier to operate. You should keep the voltage gain at 80dB for the time being. During the manufacturing process, this buffer amplifier is divided into 2 circuits. There is a rating of 4 for the operating supply voltage of the buffer op amp. There is an 175μA quiescent current in linear amplifier. Instrumentation amplifier resistance should remain within the range of 1GOhm.
INA2126PG4 Features
16 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 1GOhm
INA2126PG4 Applications
There are a lot of Texas Instruments INA2126PG4 Instrumentational OP Amps applications.
- E-book readers
- Industrial applications including automation
- Biopotential
- pH (acidity)
- Laptop
- Proportional operation circuits
- Radiation thermometry transducers
- Polarized electrodes
- Precision measurement
- Commercial audio systems
