INA2128UG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | INA2128 |
| Pin Count | 16 |
| Number of Elements | 6 |
| Number of Circuits | 2 |
| Operating Supply Current | 1.4mA |
| Nominal Supply Current | 1.5mA |
| Max Supply Current | 1.5mA |
| Quiescent Current | 700μA |
| Slew Rate | 4V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 10μV |
| Bandwidth | 1.3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Supply Voltage Limit-Max | 18V |
| -3db Bandwidth | 1.3MHz |
| Dual Supply Voltage | 15V |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Offset Current-Max (IIO) | 0.005μA |
| Voltage Gain-Nom | 10 |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA2128UG4 Overview
In the package, you will find a 16-SOIC (0.295, 7.50mm Width)-case to contain the op amp ic. A Instrumentation-type buffer amplifier is shown here. Linear amplifier is delivered in a Tube case. The number of terminations approaches 16. A total of 16 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 15V. 16 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 10μV. Surface Mount is the recommended mounting type for this linear amplifier. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. As long as the supply current of the chip does not exceed 1.4mA, this op amp ic can operate. Op amp is a member of the 80dB's 80dB family. During the manufacturing process, this buffer amplifier is divided into 2 circuits. There are a total of 6 elements in this linear amplifier. There is a quiescent current of 700μA in this operational amplifier circuit. It is important to keep the resistance within the 100GOhm range of the op amps.
INA2128UG4 Features
16 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 100GOhm
INA2128UG4 Applications
There are a lot of Texas Instruments INA2128UG4 Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Signal amplification
- Home audio systems
- Non-polarized electrodes
- Comparator
- Exponential operation circuits
- Video computer boards
- Signal transformation
- Power generator
- Signal operation
