INA2132UA/2K5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 80kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | INA2132 |
| Pin Count | 14 |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Operating Supply Current | 160μA |
| Nominal Supply Current | 370μA |
| Quiescent Current | 160μA |
| Slew Rate | 0.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 74 dB |
| Max Input Voltage | -2V |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 750μV |
| Bandwidth | 300 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 300 kHz |
| Voltage Gain | 0dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 75μV |
| Micropower | YES |
| Programmable Power | NO |
| Power | NO |
| Voltage Gain-Nom | 1 |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA2132UA/2K5 Overview
There is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. A total of 14 terminations have been reported in the past few weeks. In this case, there are 14 pins on the board. This linear amplifier should be powered by an 15V battery. Instrumentation amplifier is a part of Operational Amplifier. 14 pins are available on the instrumentation amplifier. Op amp rates 750μV as input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . A supply current of 160μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 0dB. The buffer amp consists of 1 circuits in total. As far as the device is concerned, buffer amplifier has 2 channels. This linear amplifier pack is based on the TR axis. Linear amplifier has a quiescent current of 160μA. 80kOhm is the range in which the op amp resistance should lie.
INA2132UA/2K5 Features
14 Pins
supply voltage of 15V
0dB voltage gain
Resistance of 80kOhm
INA2132UA/2K5 Applications
There are a lot of Texas Instruments INA2132UA/2K5 Instrumentational OP Amps applications.
- Professional videography
- Addition operation circuits
- Scintillation detectors
- Automation control systems
- Oscilloscopes
- High input resistance broadband
- Integrator circuits
- High speed sample
- High gain DC amplifier
- Fast A/D and D/A converters
