INA2143UAE4
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Power Supplies | +-5/+-15V |
| Number of Circuits | 2 |
| Operating Supply Current | 950μA |
| Nominal Supply Current | 2.4mA |
| Quiescent Current | 950μA |
| Min Input Voltage | 1.65V |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 80 dB |
| Max Input Voltage | -1.65V |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 32mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 150 kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Micropower | NO |
| -3db Bandwidth | 0.15MHz |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Power | NO |
| Voltage Gain-Nom | 10 |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | INA2143 |
| Pin Count | 14 |
INA2143UAE4 Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. There are two types of operational amplifiers in this circuit. Upon delivery, op amp ic is packaged in a Tube case. During the past two weeks, there have been close to 14 terminations. Linear amplifier has a total of 14 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. Instrumentation amplifier is a part of Operational Amplifier. There are 14 pins on this chip. In terms of input offset voltage, operational amplifier rates 100μV. Surface Mount is the recommended mounting type for this linear amplifier. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . Using a supply current of 950μA , this buffer op amp will be able to operate. This op amp ic has 2 circuits. Buffer amplifier has a quiescent current of 950μA.
INA2143UAE4 Features
14 Pins
supply voltage of 5V
INA2143UAE4 Applications
There are a lot of Texas Instruments INA2143UAE4 Instrumentational OP Amps applications.
- Comparator
- Television
- Precision measurement
- High gain DC amplifier
- Communication
- Cinema or auditorium audio system
- Hand-held batteries
- ECG equipment
- E-book readers
- Semiconductor detectors
