Parameters |
Input Bias Current |
3μA |
Height |
550μm |
Length |
1.8mm |
Width |
1.4mm |
Thickness |
450μm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
10-UFQFN |
Number of Pins |
10 |
Operating Temperature |
-40°C~125°C |
Packaging |
Cut Tape (CT) |
Series |
Zero-Drift |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.4mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
INA216 |
Function |
Current Monitor |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.8V |
Voltage - Input |
1.8V~5.5V |
Nominal Supply Current |
30μA |
Accuracy |
±0.01% |
Amplifier Type |
OPERATIONAL AMPLIFIER |
Common Mode Rejection Ratio |
90 dB |
Input Offset Voltage (Vos) |
75μV |
Voltage Gain |
46.02dB |
Power Supply Rejection Ratio (PSRR) |
90dB |
Sensing Method |
High-Side |
INA216A1RSWR Overview
Included in package Cut Tape (CT) is this file.oltage regulator is packaged in such a way that 10-UFQFN would understand.Surface Mount is used to mount this current regulator on the board.In order to maintain a safe operating environment, the temperature cannot exceed -40°C~125°C.Voltages of 1.8V~5.5V can be input as input voltages in this module.In addition to the 10 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.In the INA216 family, current regulator is a member.When a computer or other communication constant current regulator has 10 pins, these are pronged contacts.The current regulator is mounted on the Surface Mount axis.Channels are becoming stronger/weaker based on the following statistics: 1.As long as 5.5V is supplied with the maximal voltage, the buck boost converter will work.Operational Amplifier, which is a part that contains all of these current regulations, is included in this part.A minimum supply voltage of 1.8V is required for its operation.An example of this type of FPGA is the Zero-Drift series.It has an Amplifier type of OPERATIONAL AMPLIFIER.There are 46.02dB voltage gains, which are?the simple ratio of the output voltage to the input voltage of a current regulation.
INA216A1RSWR Features
Cut Tape (CT) package
INA216 family
The maximal supply voltage of 5.5V
Zero-Drift series
INA216A1RSWR Applications
There are a lot of Texas Instruments INA216A1RSWR Current Regulation/Managements applications.
- Current sensing
- Transmission controls
- Smart battery packs
- Over current monitor
- Battery management
- Over-current measurement
- Power management
- Programmable current source
- DC-to-dc converters
- Over current monitor