INA216A2RSWR
| Parameters | |
|---|---|
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Voltage - Input | 1.8V~5.5V |
| Nominal Supply Current | 30μA |
| Accuracy | ±0.05% |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 90 dB |
| Input Offset Voltage (Vos) | 75μV |
| Voltage Gain | 46.02dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Sensing Method | High-Side |
| Height | 550μm |
| Length | 1.8mm |
| Width | 1.4mm |
| Thickness | 450μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFQFN |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | Zero-Drift |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | INA216 |
| Function | Current Monitor |
INA216A2RSWR Overview
In package Cut Tape (CT), buck boost converter is included.In this case, voltage regulator has been packaged in the same way as 10-UFQFN.Surface Mount is used to mount this current regulator on the board.There should be no temperature above -40°C~125°C at the time of operation.As an input voltage, you will be able to input a voltage equal to 1.8V~5.5V.A 10 termination is a method of terminating a transmission line, in which a voltage regulator is used that matches the impedance of the transmission line in order to terminate the line with a 10 termination.There are two types of INA216s in this family.As part of a signal interface in a computer or other communication constant current regulator, 10 pins are pronged contacts.Using Surface Mount as a mounting system, this current regulator is mounted.The number of channels is growing both strongly and weakly: 1.It supports the maximal supply voltage of 5.5V.This part is included in Operational Amplifier.As long as the supply voltage is lower than 1.8V, it will operate correctly.An example of this type of FPGA is the Zero-Drift series.Amplifier type OPERATIONAL AMPLIFIER can be found on this electrical buck boost converter.In current regulations, 46.02dB voltage gains can be seen as a simple ratio of the output voltage to the input voltage.
INA216A2RSWR Features
Cut Tape (CT) package
INA216 family
The maximal supply voltage of 5.5V
Zero-Drift series
INA216A2RSWR Applications
There are a lot of Texas Instruments INA216A2RSWR Current Regulation/Managements applications.
- Automotive current measurement
- Vehicle dynamic controls
- Current sensing
- Over-current protection
- Motor controls
- Suspension controls
- Over current monitor
- Battery chargers
- Transmission controls
- Power supply current measurement
