INA216A3RSWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFQFN |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | Zero-Drift |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | INA216 |
| Function | Current Monitor |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Voltage - Input | 1.8V~5.5V |
| Nominal Supply Current | 30μA |
| Accuracy | ±0.06% |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 90 dB |
| Input Offset Voltage (Vos) | 75μV |
| Voltage Gain | 46.02dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Sensing Method | High-Side |
| Input Bias Current | 3μA |
| Height | 550μm |
| Length | 1.8mm |
| Width | 1.4mm |
| Thickness | 450μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA216A3RSWR Overview
Including buck boost converter in package Cut Tape (CT) is a good idea.A package in the way of 10-UFQFN is used for voltage regulator.This electronic part is mounted in the way of Surface Mount.The operating temperature should not exceed -40°C~125°C.Current regulator is possible to use a voltage input of 1.8V~5.5V for the input.A 10 termination can be defined as a terminating voltage regulator which matches the characteristic impedance of a line, which allows a transmission line to be terminated with a voltage regulator matching its characteristic impedance.There are two types of INA216s in this family.In a computer or other communication constant current regulator, 10 pins are pronged contacts that provide a signal interface.Using Surface Mount as a mounting system, this current regulator is mounted.Compared to the last few years, the number of channels has grown strong/weak: 1.A maximum supply voltage of 5.5V can be supported by it.There are several current regulations that are included in the Operational Amplifier part, which is part of the entire assembly.As long as the supply voltage is lower than 1.8V, it will operate correctly.These FPGAs belong to the Zero-Drift series.An amplifying buck boost converter such as this one is a OPERATIONAL AMPLIFIER type amplifying buck boost converter.46.02dB voltage gains are the simple ratios of output voltage to input voltage in a current regulation.
INA216A3RSWR Features
Cut Tape (CT) package
INA216 family
The maximal supply voltage of 5.5V
Zero-Drift series
INA216A3RSWR Applications
There are a lot of Texas Instruments INA216A3RSWR Current Regulation/Managements applications.
- Over current monitor
- Power supply current measurement
- Battery chargers
- Over-current measurement
- DC-to-dc converters
- Power management
- Industrial applications current measurement
- Automotive current measurement
- Over current monitor
- Suspension controls
