INA216A4RSWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFQFN |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | Zero-Drift |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.4mm |
| Base Part Number | INA216 |
| Function | Current Monitor |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Voltage - Input | 1.8V~5.5V |
| Nominal Supply Current | 30μA |
| Accuracy | ±0.03% |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 90 dB |
| Input Offset Voltage (Vos) | 75μV |
| Voltage Gain | 46.02dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Sensing Method | High-Side |
| Height | 550μm |
| Length | 1.8mm |
| Width | 1.4mm |
| Thickness | 450μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA216A4RSWR Overview
Buck boost converter is part of the package Cut Tape (CT).In this case, voltage regulator has been packaged in the same way as 10-UFQFN.A mounting hole is provided for Surface Mount to mount this current regulator.As a rule of thumb, the operating temperature should not exceed -40°C~125°C.As an input voltage, you will be able to input a voltage equal to 1.8V~5.5V.A 10 termination is a method of terminating a transmission line, in which a voltage regulator is used that matches the impedance of the transmission line in order to terminate the line with a 10 termination.INA216 family is associated with current regulator.In a computer or other communication constant current regulator, 10 pins are pronged contacts that provide a signal interface.The current regulator is mounted on the Surface Mount axis.In terms of channel number, I would say that it is growing strongly/weakly: 1.As long as 5.5V is supplied with the maximum voltage, it is supported.The current regulations of this part are included in a part that is named Operational Amplifier.In order for it to operate, 1.8V has to be the minimum supply voltage.An example of this type of FPGA is the Zero-Drift series.This electrical buck boost converter has a OPERATIONAL AMPLIFIER amplifier type.46.02dB voltage gains are the simple ratios of output voltage to input voltage in a current regulation.
INA216A4RSWR Features
Cut Tape (CT) package
INA216 family
The maximal supply voltage of 5.5V
Zero-Drift series
INA216A4RSWR Applications
There are a lot of Texas Instruments INA216A4RSWR Current Regulation/Managements applications.
- Level translating
- Transmission controls
- Vehicle dynamic controls
- Battery management
- Smart battery packs
- Over current monitor
- Over current monitor
- Engine management
- Industrial applications current measurement
- Suspension controls
