banner_page

INA216A4RSWT

10 Terminations10 Pin INA216 Current regulatorZero-Drift Series -40°C~125°C Min 1.8V Max 5.5V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-INA216A4RSWT
  • Package: 10-UFQFN
  • Datasheet: -
  • Stock: 833
  • Description: 10 Terminations10 Pin INA216 Current regulatorZero-Drift Series -40°C~125°C Min 1.8V Max 5.5V (Kg)

Details

Tags

Parameters
Max Supply Voltage 5.5V
Min Supply Voltage 1.8V
Voltage - Input 1.8V~5.5V
Nominal Supply Current 30μA
Accuracy ±0.03%
Amplifier Type OPERATIONAL AMPLIFIER
Common Mode Rejection Ratio 90 dB
Input Offset Voltage (Vos) 75μV
Voltage Gain 46.02dB
Power Supply Rejection Ratio (PSRR) 90dB
Sensing Method High-Side
Height 550μm
Length 1.8mm
Width 1.4mm
Thickness 450μm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 10-UFQFN
Number of Pins 10
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Series Zero-Drift
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 10
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Terminal Position QUAD
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) 260
Terminal Pitch 0.4mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number INA216
Function Current Monitor
Number of Channels 1

INA216A4RSWT Overview


Including buck boost converter in package Tape & Reel (TR) is a good idea.Voltage regulator is packaged in the way of 10-UFQFN.There is a Surface Mount mounted on this current regulator.As a rule of thumb, the operating temperature should not exceed -40°C~125°C.There is a support for voltages of 1.8V~5.5V as input voltages for this voltage regulator.In addition to the 10 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.Moreover, current regulator is part of the INA216 family.In computers and other communication constant current regulators, 10 pins are pronged contacts that form part of a signal interface.In this example, the current regulator has been mounted using Surface Mount.Channels are becoming stronger/weaker based on the following statistics: 1.The maximum supply voltage of 5.5V is supported by it.Operational Amplifier is a part that includes these current regulations, all of which are included in one part.This buck boost converter is designed to operate with a minimal supply voltage of 1.8V as its input voltage.There are FPGAs of this type in the Zero-Drift series.Amplifier type OPERATIONAL AMPLIFIER can be found on this electrical buck boost converter.A current regulation has 46.02dB voltage gains, which are simply a function of the input and output voltage between them.

INA216A4RSWT Features


Tape & Reel (TR) package
INA216 family
The maximal supply voltage of 5.5V
Zero-Drift series

INA216A4RSWT Applications


There are a lot of Texas Instruments INA216A4RSWT Current Regulation/Managements applications.

  • Power management
  • Industrial applications current measurement
  • Battery management
  • Current sensing
  • Engine management
  • Suspension controls
  • Transmission controls
  • Smart battery packs
  • Motor controls
  • Diesel injection controls

Write a review

Note: HTML is not translated!
    Bad           Good