Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
4-UFBGA, DSBGA |
Number of Pins |
4 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
Zero-Drift |
JESD-609 Code |
e1 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
4 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Silver/Copper (Sn/Ag/Cu) |
Subcategory |
Operational Amplifier |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
260 |
Base Part Number |
INA216 |
Function |
Current Monitor |
Number of Elements |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.8V |
Operating Supply Current |
30μA |
Voltage - Input |
1.8V~5.5V |
Nominal Supply Current |
25μA |
Max Supply Current |
25μA |
Accuracy |
±0.03% |
Min Input Voltage |
1.8V |
Slew Rate |
0.03 V/μs |
Amplifier Type |
OPERATIONAL AMPLIFIER |
Common Mode Rejection Ratio |
90 dB |
Max Input Voltage |
5.5V |
Input Offset Voltage (Vos) |
20μV |
Bandwidth |
2.5 kHz |
Voltage Gain |
46.02dB |
Power Supply Rejection Ratio (PSRR) |
90dB |
Sensing Method |
High-Side |
Input Bias Current |
3μA |
Height |
625μm |
Length |
1.2mm |
Width |
1mm |
Thickness |
1.2mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
INA216A4YFFT Overview
The package includes buck boost converter in version Tape & Reel (TR).A package in the way of 4-UFBGA, DSBGA is used for voltage regulator.Surface Mount mounts this current regulator.In order to ensure the correct operation of the system, the temperature should not exceed -40°C~125°C.The input voltage of 1.8V~5.5V is supported as an input voltage.An example of this is the 4 termination, which is a procedure in which a transmission line is terminated with a voltage regulator that is equal in impedance to the line characteristics.As part of the INA216 family, current regulator belongs to this class.Several pronged contacts are used in computer interfaces as 4 pins.It is mounted on a Surface Mount-axis by this current regulator.As long as 5.5V is supplied with the maximal voltage, the buck boost converter will work.Operational Amplifier, which is a part that contains all of these current regulations, is included in this part.The buck boost converter operates with a minimum supply voltage of 1.8V.This type of FPGA is found in the Zero-Drift series.The Amplifier type of this electrical buck boost converter is OPERATIONAL AMPLIFIER.30μA is the operating supply current provided for its operation.Basically, current regulation is made up of 1 elements.With 5.5V's maximum input voltage, it is design power convertered to provide maximum design power converter flexibility.As a result of the maximum supply current of 25μA, maximum current regulator's design flexibility is possible.In a current regulation, 46.02dB voltage gains are the simple ratio between the output voltage and the input voltage.The minimal input voltage of 1.8V makes it feature maximum design flexibility.
INA216A4YFFT Features
Tape & Reel (TR) package
INA216 family
The maximal supply voltage of 5.5V
Zero-Drift series
1 elements
INA216A4YFFT Applications
There are a lot of Texas Instruments INA216A4YFFT Current Regulation/Managements applications.
- Engine management
- Battery chargers
- Vehicle dynamic controls
- Over-current measurement
- DC-to-dc converters
- Programmable current source
- Suspension controls
- Over current monitor
- DC motor control
- Motor controls