banner_page

INA219AIDCNTG4

8 Terminations3.3V 8 Pin INA219 Current regulatorZero-Drift Series -40°C~125°C Min 3V Max 5.5V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-INA219AIDCNTG4
  • Package: SOT-23-8
  • Datasheet: -
  • Stock: 735
  • Description: 8 Terminations3.3V 8 Pin INA219 Current regulatorZero-Drift Series -40°C~125°C Min 3V Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case SOT-23-8
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Series Zero-Drift
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Power Management Circuits
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Base Part Number INA219
Function Current Monitor
Number of Channels 2
Max Supply Voltage 5.5V
Min Supply Voltage 3V
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Voltage - Input 0V~26V
Nominal Supply Current 1mA
Current - Output 10mA
Adjustable Threshold NO
Quiescent Current 700μA
Accuracy ±1%
Common Mode Rejection Ratio 100 dB
Threshold Voltage +2
Sensing Method High-Side
Height 1.1mm
Length 2.9mm
Width 1.63mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

INA219AIDCNTG4 Overview


There is a package called Tape & Reel (TR) that contains buck boost converter.Depending on how SOT-23-8 packages voltage regulator, voltage regulator will be packaged in the same way.Surface Mount is used to mount this current regulator on the board.As a rule of thumb, the operating temperature should not exceed -40°C~125°C.As an input voltage, you will be able to input a voltage equal to 0V~26V.In addition to the 8 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.This is a member of the INA219 family.As part of a signal interface in a computer or other communication constant current regulator, 8 pins are pronged contacts.The constant current should work as long as it is powered by a 3.3VV power source, and therefore must be plugged into a 3.3VV outlet.The output current of 10mA makes it feature maximum design flexibility.Analog IC POWER SUPPLY SUPPORT CIRCUIT is used in this power converter.Compared to the last few years, the number of channels has grown strong/weak: 2.As a result, it allows 5.5V to be supplied with its maximum voltage.Power Management Circuits is a part that includes these current regulations, all of which are included in one part.In order for it to operate, 3V has to be the minimum supply voltage.It is of this type that the Zero-Drift series FPGAs are.Regardless of external influence, it consumes 700μA of quiescent current.

INA219AIDCNTG4 Features


Tape & Reel (TR) package
INA219 family
The maximal supply voltage of 5.5V
Zero-Drift series

INA219AIDCNTG4 Applications


There are a lot of Texas Instruments INA219AIDCNTG4 Current Regulation/Managements applications.

  • Over current monitor
  • Transmission controls
  • Power management
  • Power supply current measurement
  • Battery management
  • Over current monitor
  • Level translating
  • Over-current protection
  • Vehicle dynamic controls
  • DC motor control

Write a review

Note: HTML is not translated!
    Bad           Good