INA220BQDGSRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 12 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | INA220 |
| Function | Current Monitor |
| Number of Channels | 1 |
| Trim/Adjustable Output | YES |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Voltage - Input | 0V~26V |
| Nominal Supply Current | 1mA |
| Adjustable Threshold | NO |
| Accuracy | ±0.5% |
| Common Mode Rejection Ratio | 100 dB |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 50μV |
| Gain Bandwidth Product | 11 kHz |
| Supply Current-Max (Isup) | 5mA |
| Threshold Voltage | 2V |
| Sensing Method | High/Low-Side |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA220BQDGSRQ1 Overview
Package Tape & Reel (TR) includes buck boost converter.Depending on how 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) packages voltage regulator, voltage regulator will be packaged in the same way.In this case, Surface Mount holds the current regulator in place.In order to ensure the correct operation of the system, the temperature should not exceed -40°C~125°C.As an input voltage, you will be able to input a voltage equal to 0V~26V.The 10 termination is a method for terminating a transmission line by connecting a voltage regulator that matches its characteristic impedance, which is the method of terminating a transmission line with a voltage regulator.This is a member of the INA220 family.In computers and other communications constant current regulators, 10 pins are pronged contacts that form part of a signal interface.It is mounted on a Surface Mount-axis by this current regulator.In order for the constant current to work, it should be powered by a 3.3VV power source, which is found in most 3.3VV power supplies.IC POWER SUPPLY SUPPORT CIRCUIT is the power converter's analog IC.Channels are becoming stronger/weaker based on the following statistics: 1.As a result, it allows 5.5V to be supplied with its maximum voltage.In order to include these current regulations, there is a part called Power Management Circuits that includes them.As long as the supply voltage is lower than 3V, it will operate correctly.The Automotive, AEC-Q100 series of FPGAs fall into this category.The maximal supply current (Isup) supplied for current regulation's operation reaches 5mA.As well as being characterized by RESET THRESHOLD VOLTAGE IS 2V, constant current regulator is also characterized.
INA220BQDGSRQ1 Features
Tape & Reel (TR) package
INA220 family
The maximal supply voltage of 5.5V
Automotive, AEC-Q100 series
INA220BQDGSRQ1 Applications
There are a lot of Texas Instruments INA220BQDGSRQ1 Current Regulation/Managements applications.
- Level translating
- Smart battery packs
- Power management
- DC-to-dc converters
- Programmable current source
- Industrial applications current measurement
- Over current monitor
- Diesel injection controls
- Engine management
- Automotive current measurement
