Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-VFQFN Exposed Pad |
Number of Pins |
16 |
Weight |
50.008559mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Cut Tape (CT) |
JESD-609 Code |
e4 |
Feature |
I2C |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
RESET THRESHOLD VOLTAGE IS 2V |
Subcategory |
Power Management Circuits |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
3.3V |
Base Part Number |
INA230 |
Function |
Current Monitor |
Power Supplies |
3.3V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2.7V |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Operating Supply Current |
420μA |
Voltage - Input |
0V~28V |
Nominal Supply Current |
330μA |
Output Current |
10mA |
Max Supply Current |
420μA |
Adjustable Threshold |
YES |
Accuracy |
0.5% |
Common Mode Rejection Ratio |
100 dB |
Input Offset Voltage (Vos) |
50μV |
Bandwidth |
7 kHz |
Gain Bandwidth Product |
7 kHz |
Threshold Voltage |
2 |
Sensing Method |
High/Low-Side |
Input Bias Current |
10μA |
Max Junction Temperature (Tj) |
150°C |
Number of Amplifiers |
1 |
Height |
1mm |
Length |
3mm |
Width |
3mm |
Thickness |
900μm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
INA230AIRGTT Overview
In package Cut Tape (CT), buck boost converter is included.oltage regulator is packaged in such a way that 16-VFQFN Exposed Pad would understand.There is a Surface Mount mounted on this current regulator.As a rule of thumb, the operating temperature should not exceed -40°C~125°C.Current regulator is possible to use a voltage input of 0V~28V for the input.There are two types of INA230s in this family.Several pronged contacts are used in computer interfaces as 16 pins.Using Surface Mount as a mounting system, this current regulator is mounted.The constant current should work as long as it is powered by a 3.3VV power source, and therefore must be plugged into a 3.3VV outlet.The analog IC used by this power converter is called POWER SUPPLY SUPPORT CIRCUIT.There is a strong/weak growth in the number of channels: 1.As a result, it allows 5.5V to be supplied with its maximum voltage.In this case, these current regulations are included as part of a part called Power Management Circuits.In order to operate, it must be powered by a minimum voltage of 2.7V.This boost converter is supplied with an operating supply current of 420μA for its operation.3.3V power supplies provide power to the boost converter.RESET THRESHOLD VOLTAGE IS 2V is also one of the characteristics of this type.With its maximum supply current, 420μA offers maximum current regulator's design flexibility due to its maximal supply current.
INA230AIRGTT Features
Cut Tape (CT) package
INA230 family
The maximal supply voltage of 5.5V
3.3V power supplies
INA230AIRGTT Applications
There are a lot of Texas Instruments INA230AIRGTT Current Regulation/Managements applications.
- Over current monitor
- Current sensing
- DC motor control
- Industrial applications current measurement
- DC-to-dc converters
- Diesel injection controls
- Programmable current source
- Engine management
- Over-current protection
- Automotive current measurement