Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-55°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Resistance |
10 TΩ |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
INA2332 |
Pin Count |
14 |
Output Type |
Rail-to-Rail |
Number of Elements |
6 |
Power Supplies |
3/5V |
Number of Circuits |
2 |
Operating Supply Current |
415μA |
Nominal Supply Current |
980μA |
Quiescent Current |
415μA |
Slew Rate |
5V/μs |
Amplifier Type |
Instrumentation |
Common Mode Rejection Ratio |
60 dB |
Current - Input Bias |
0.5pA |
Voltage - Supply, Single/Dual (±) |
2.5V~5.5V ±1.25V~2.75V |
Output Current per Channel |
48mA |
Input Offset Voltage (Vos) |
8mV |
Bandwidth |
2MHz |
Voltage Gain |
60dB |
Average Bias Current-Max (IIB) |
0.00001μA |
Power Supply Rejection Ratio (PSRR) |
86.02dB |
Supply Voltage Limit-Max |
7.5V |
Voltage - Input Offset |
2mV |
-3db Bandwidth |
2MHz |
Input Offset Current-Max (IIO) |
0.00001μA |
Voltage Gain-Nom |
25 |
Non-linearity-Max |
0.4% |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
INA2332AIPWTG4 Overview
The linear amplifier is packaged in a 14-TSSOP (0.173, 4.40mm Width) case. This is a Instrumentation type op amp. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations approaches 14. It consists of a total of 14 pins in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. The buffer op amp includes 14 pins. Regarding input offset voltage, op amp rates 8mV. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -55°C~125°C. It is possible to operate this buffer amplifier from a supply current of 415μA . Keeping the voltage gain at 60dB is the best course of action. On this buffer amplifier, there are 2 circuits. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. A voltage rating of 6 is indicated for the op amp's operating supply voltage. TR is adopted to pack the instrumentation amplifier. Currently, linear amplifier is operating with a quiescent current of 415μA. 10 TΩ should be the range of resistance for the instrumentation amplifier.
INA2332AIPWTG4 Features
14 Pins
supply voltage of 5V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 10 TΩ
INA2332AIPWTG4 Applications
There are a lot of Texas Instruments INA2332AIPWTG4 Instrumentational OP Amps applications.
- Band-pass filter
- Wireless base stations
- Multiplication circuits
- pH (acidity)
- Television broadcasting equipment
- Image computer boards
- Semiconductor detectors
- Computer workstations
- Weak signal detection
- Inverse/same-phase proportional circuit