banner_page

INA270AID

8 Terminations8 Pin INA270 Current regulator-40°C~125°C Min 2.7V Max 18V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-INA270AID
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 445
  • Description: 8 Terminations8 Pin INA270 Current regulator-40°C~125°C Min 2.7V Max 18V (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 75.891673mg
Operating Temperature -40°C~125°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
ECCN Code EAR99
Subcategory Operational Amplifier
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Base Part Number INA270
Function Current Monitor
Number of Elements 3
Number of Channels 1
Max Supply Voltage 18V
Min Supply Voltage 2.7V
Operating Supply Current 950μA
Voltage - Input -16V~80V
Max Supply Current 900μA
Accuracy ±1%
Slew Rate 1 V/μs
Amplifier Type OPERATIONAL AMPLIFIER
Common Mode Rejection Ratio 80 dB
Input Offset Voltage (Vos) 2.5mV
Bandwidth 130 kHz
Voltage Gain 22.92dB
Power Supply Rejection Ratio (PSRR) 106.02dB
Sensing Method High-Side
Input Bias Current 16μA
Voltage Gain-Nom 14
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Contact Plating Gold

INA270AID Overview


There is a package called Tube that contains buck boost converter.The package is in the form of 8-SOIC (0.154, 3.90mm Width).There is a Surface Mount mounted on this current regulator.The operating temperature should not exceed -40°C~125°C.Current regulator is possible to use a voltage input of -16V~80V for the input.8 terminations are treated as terminations of transmission lines that use a voltage regulator with the characteristic impedance of the line as the means to terminate the transmission line.There are two types of INA270s in this family.As part of a signal interface in a computer or other communication constant current regulator, 8 pins are pronged contacts.It is mounted on a Surface Mount-axis by this current regulator.The number of channels is growing strong/weak: 1.The maximum supply voltage of 18V is supported by it.The current regulations of this part are included in a part that is named Operational Amplifier.The buck boost converter operates with a minimum supply voltage of 2.7V.This electrical buck boost converter has an amplifier type of OPERATIONAL AMPLIFIER, which is a type of amplifier.When 950μA reaches, it receives its operating supply current.A 3-element consists of current regulation.In terms of current regulator's design flexibility, 900μA features a maximum supply current.22.92dB voltage gains are the simple ratios of output voltage to input voltage in a current regulation.

INA270AID Features


Tube package
INA270 family
The maximal supply voltage of 18V
3 elements

INA270AID Applications


There are a lot of Texas Instruments INA270AID Current Regulation/Managements applications.

  • Over current monitor
  • Vehicle dynamic controls
  • Programmable current source
  • Automotive current measurement
  • Over-current measurement
  • Power management
  • Current sensing
  • DC-to-dc converters
  • Smart battery packs
  • Engine management

Write a review

Note: HTML is not translated!
    Bad           Good