banner_page

INA271AID

8 Pin INA271 Current regulator-40°C~125°C Min 2.7V Max 18V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-INA271AID
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 952
  • Description: 8 Pin INA271 Current regulator-40°C~125°C Min 2.7V Max 18V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 75.891673mg
Operating Temperature -40°C~125°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
ECCN Code EAR99
Subcategory Operational Amplifier
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Base Part Number INA271
Function Current Monitor
Operating Supply Voltage 15V
Number of Channels 1
Max Supply Voltage 18V
Min Supply Voltage 2.7V
Operating Supply Current 950μA
Voltage - Input -16V~80V
Accuracy ±1%
Slew Rate 1 V/μs
Amplifier Type OPERATIONAL AMPLIFIER
Common Mode Rejection Ratio 80 dB
Input Offset Voltage (Vos) 2.5mV
Bandwidth 130 kHz
Voltage Gain 26.02dB
Power Supply Rejection Ratio (PSRR) 106.02dB
Sensing Method High-Side
Input Bias Current 16μA
Number of Amplifiers 3
Voltage Gain-Nom 20
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

INA271AID Overview


In package Tube, buck boost converter is included.oltage regulator is packaged in such a way that 8-SOIC (0.154, 3.90mm Width) would understand.Mounted by Surface Mount, this current regulator is a semiconductor.The operating temperature should not exceed -40°C~125°C.As an input voltage, you will be able to input a voltage equal to -16V~80V.Among the INA271 family of products.In computers and other communications constant current regulators, 8 pins are pronged contacts that form part of a signal interface.The current regulator is mounted on the Surface Mount axis.In terms of channel number, I would say that it is growing strongly/weakly: 1.A maximum supply voltage of 18V can be supported by it.In this case, these current regulations are included as part of a part called Operational Amplifier.As a result, it operates at the minimal supply voltage of 2.7V.This electrical buck boost converter has a OPERATIONAL AMPLIFIER amplifier type.When 950μA reaches, it receives its operating supply current.For high efficiency, keep the supply voltage at 15V.Current regulations have 26.02dB voltage gains, which are the ratio of output voltage to input voltage.

INA271AID Features


Tube package
INA271 family
The maximal supply voltage of 18V

INA271AID Applications


There are a lot of Texas Instruments INA271AID Current Regulation/Managements applications.

  • Vehicle dynamic controls
  • Current sensing
  • Over current monitor
  • Engine management
  • Suspension controls
  • Motor controls
  • Industrial applications current measurement
  • Battery management
  • Transmission controls
  • Over current monitor

Write a review

Note: HTML is not translated!
    Bad           Good