Parameters |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
8 |
Weight |
75.891673mg |
Packaging |
Tape and Reel |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
2 |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-40°C |
Subcategory |
Operational Amplifier |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Pin Count |
8 |
Number of Elements |
3 |
Temperature Grade |
AUTOMOTIVE |
Number of Channels |
1 |
Max Supply Voltage |
18V |
Min Supply Voltage |
2.7V |
Nominal Supply Current |
950μA |
Accuracy |
1 % |
Slew Rate |
1 V/μs |
Amplifier Type |
OPERATIONAL AMPLIFIER |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
16μA |
Input Offset Voltage (Vos) |
2.5mV |
Bandwidth |
130 kHz |
Voltage Gain |
26.02dB |
Power Supply Rejection Ratio (PSRR) |
106.02dB |
Length |
4.9mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
INA271AIDRG4 Overview
Buck boost converter is embedded in the Tape and Reel package.SOIC has packaged voltage regulator in this manner.8 terminations are treated as terminations of transmission lines that use a voltage regulator with the characteristic impedance of the line as the means to terminate the transmission line.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. The current regulator is mounted on the Surface Mount axis.Channels are becoming stronger/weaker based on the following statistics: 1.As long as 18V is supplied with the maximum voltage, it is supported.There is a part called Operational Amplifier which contains all of these current regulations.It operates with the minimal supply voltage of 2.7V.This electrical buck boost converter uses a OPERATIONAL AMPLIFIER amplifier type.In this case, current regulation consists of 3 elements.In current regulations, 26.02dB voltage gains can be seen as a simple ratio of the output voltage to the input voltage.In order to ensure its reliability, it operates at a maximum temperature of 125°C.In order to operate the boost controller, it should be kept at a temperature greater than -40°C.
INA271AIDRG4 Features
Tape and Reel package
The maximal supply voltage of 18V
3 elements
The maximal operating temperature of 125°C to ensure its reliability.
INA271AIDRG4 Applications
There are a lot of Texas Instruments INA271AIDRG4 Current Regulation/Managements applications.
- Battery chargers
- DC motor control
- Transmission controls
- Programmable current source
- Suspension controls
- Diesel injection controls
- Over-current protection
- Over current monitor
- Over-current measurement
- Motor controls