banner_page

INA271SHKJ

8 Terminations8 Pin INA271 Current regulator-55°C~210°C Min 2.7V Max 18V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-INA271SHKJ
  • Package: 8-CFlatpack
  • Datasheet: -
  • Stock: 511
  • Description: 8 Terminations8 Pin INA271 Current regulator-55°C~210°C Min 2.7V Max 18V (Kg)

Details

Tags

Parameters
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-CFlatpack
Number of Pins 8
Operating Temperature -55°C~210°C
Packaging Tube
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Subcategory Operational Amplifier
Terminal Position DUAL
Base Part Number INA271
Function Current Monitor
Number of Elements 3
Number of Channels 1
Max Supply Voltage 18V
Min Supply Voltage 2.7V
Voltage - Input -16V~80V
Nominal Supply Current 950μA
Accuracy ±4.6%
Amplifier Type OPERATIONAL AMPLIFIER
Common Mode Rejection Ratio 70 dB
Input Offset Voltage (Vos) 5mV
Bandwidth 130 kHz
Gain Bandwidth Product 130 kHz
Voltage Gain 26.02dB
Sensing Method High-Side
Input Bias Current 25μA
Voltage Gain-Nom 20
Height 1.65mm
Length 6.9mm
Width 5.65mm
Thickness 1.65mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

INA271SHKJ Overview


Buck boost converter is embedded in the Tube package.In the same manner as 8-CFlatpack, voltage regulator is packaged.A mounting hole is provided for Surface Mount to mount this current regulator.In order to ensure the correct operation of the system, the temperature should not exceed -55°C~210°C.Voltages of -16V~80V can be input as input voltages in this module.A 8 termination can be defined as a terminating voltage regulator which matches the characteristic impedance of a line, which allows a transmission line to be terminated with a voltage regulator matching its characteristic impedance.In the INA271 family, current regulator is a member.In a computer or other communication constant current regulator, 8 pins are pronged contacts that provide a signal interface.This electronic part is mounted in the way of Surface Mount.Channels are becoming stronger/weaker based on the following statistics: 1.As a result, it allows 18V to be supplied with its maximum voltage.In this case, these current regulations are included as part of a part called Operational Amplifier.This buck boost converter is designed to operate with a minimal supply voltage of 2.7V as its input voltage.This electrical buck boost converter has an amplifier type of OPERATIONAL AMPLIFIER, which is a type of amplifier.Basically, current regulation is made up of 3 elements.A current regulation has 26.02dB voltage gains, which are simply a function of the input and output voltage between them.

INA271SHKJ Features


Tube package
INA271 family
The maximal supply voltage of 18V
3 elements

INA271SHKJ Applications


There are a lot of Texas Instruments INA271SHKJ Current Regulation/Managements applications.

  • Over current monitor
  • Smart battery packs
  • Industrial applications current measurement
  • Battery management
  • Transmission controls
  • Current sensing
  • Suspension controls
  • DC-to-dc converters
  • Motor controls
  • Automotive current measurement

Write a review

Note: HTML is not translated!
    Bad           Good