banner_page

INA282AID

8 Terminations8 Pin INA282 Current regulatorZero-Drift Series -40°C~125°C Min 2.7V Max 18V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-INA282AID
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 439
  • Description: 8 Terminations8 Pin INA282 Current regulatorZero-Drift Series -40°C~125°C Min 2.7V Max 18V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 75.891673mg
Operating Temperature -40°C~125°C
Packaging Tube
Series Zero-Drift
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
ECCN Code EAR99
Resistance 6kOhm
Subcategory Operational Amplifier
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Base Part Number INA282
Function Current Monitor
Number of Channels 1
Max Supply Voltage 18V
Min Supply Voltage 2.7V
Operating Supply Current 900μA
Voltage - Input -14V~80V
Max Supply Current 900μA
Accuracy ±0.4%
Amplifier Type OPERATIONAL AMPLIFIER
Common Mode Rejection Ratio 120 dB
Input Offset Voltage (Vos) 70μV
Bandwidth 10 kHz
Voltage Gain 33.98dB
Power Supply Rejection Ratio (PSRR) 110.46dB
Gain 4 dB
Sensing Method High/Low-Side
Input Bias Current 25μA
Voltage Gain-Nom 50
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

INA282AID Overview


Buck boost converter is part of the package Tube.8-SOIC (0.154, 3.90mm Width) has packaged voltage regulator in this manner.Surface Mount is used to mount this current regulator on the board.Current regulator is recommended that the operating temperature not exceed -40°C~125°C.An input voltage wcurrent regulatorh a value of -14V~80V may be used as an input voltage.A 8 termination can be defined as a terminating voltage regulator which matches the characteristic impedance of a line, which allows a transmission line to be terminated with a voltage regulator matching its characteristic impedance.There are two types of INA282s in this family.As part of a signal interface in a computer or other communication constant current regulator, 8 pins are pronged contacts.An current regulator such as this one is mounted by Surface Mount.A significant number of channels are growing strongly/weakly: 1.There is a maximum voltage to be supplied to 18V by it.This part is included in Operational Amplifier.As long as the supply voltage is lower than 2.7V, it will operate correctly.A type of FPGA that falls under this category is the Zero-Drift series.The amplifier type of this electrical buck boost converter is OPERATIONAL AMPLIFIER, which means that it is an amplifier.The operating supply current supplied for its operation reaches 900μA.With its maximum supply current, 900μA offers maximum current regulator's design flexibility due to its maximal supply current.Current regulations have 33.98dB voltage gains, which are simple ratios between the output voltage and the input voltage.This electrical dc to dc converter has a resistance of 6kOhm (Ω).

INA282AID Features


Tube package
INA282 family
The maximal supply voltage of 18V
Zero-Drift series

INA282AID Applications


There are a lot of Texas Instruments INA282AID Current Regulation/Managements applications.

  • Smart battery packs
  • Automotive current measurement
  • Current sensing
  • Motor controls
  • Battery chargers
  • Over-current protection
  • Industrial applications current measurement
  • Transmission controls
  • Programmable current source
  • Power supply current measurement

Write a review

Note: HTML is not translated!
    Bad           Good