INA282AQDRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, Zero-Drift |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 6kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | INA282 |
| Function | Current Monitor |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Voltage - Input | -14V~80V |
| Nominal Supply Current | 900μA |
| Accuracy | ±0.4% |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 120 dB |
| Input Offset Voltage (Vos) | 70μV |
| Gain Bandwidth Product | 10 kHz |
| Voltage Gain | 33.98dB |
| Power Supply Rejection Ratio (PSRR) | 110.46dB |
| Sensing Method | High/Low-Side |
| Voltage Gain-Nom | 50 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA282AQDRQ1 Overview
Buck boost converter is embedded in the Tape & Reel (TR) package.8-SOIC (0.154, 3.90mm Width) has packaged voltage regulator in this manner.In this case, Surface Mount holds the current regulator in place.In order to ensure the correct operation of the system, the temperature should not exceed -40°C~125°C.An input voltage wcurrent regulatorh a value of -14V~80V may be used as an input voltage.In addition to the 8 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.Current regulator belongs to the family INA282.In computers and other communication constant current regulators, 8 pins are pronged contacts that form part of a signal interface.The current regulator is mounted on the Surface Mount axis.Compared to the last few years, the number of channels has grown strong/weak: 1.There is a maximum voltage to be supplied to 18V by it.In this case, these current regulations are included as part of a part called Operational Amplifier.As long as the supply voltage is lower than 2.7V, it will operate correctly.A type of FPGA that falls under this category is the Automotive, AEC-Q100, Zero-Drift series.This electrical buck boost converter has a OPERATIONAL AMPLIFIER amplifier type.In a current regulation, 33.98dB voltage gains are the simple ratio between the output voltage and the input voltage.The resistance of the electrical dc to dc converter is 6kOhm (Ω).
INA282AQDRQ1 Features
Tape & Reel (TR) package
INA282 family
The maximal supply voltage of 18V
Automotive, AEC-Q100, Zero-Drift series
INA282AQDRQ1 Applications
There are a lot of Texas Instruments INA282AQDRQ1 Current Regulation/Managements applications.
- Vehicle dynamic controls
- Industrial applications current measurement
- Engine management
- Motor controls
- Power management
- DC motor control
- Battery chargers
- Over-current protection
- Over current monitor
- Power supply current measurement
