INA284AIDR
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Zero-Drift |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 6kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | INA284 |
| Function | Current Monitor |
| Qualification Status | Not Qualified |
| Output Type | Voltage |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 600μA |
| Voltage - Input | -14V~80V |
| Accuracy | ±0.4% |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 120 dB |
| Input Offset Voltage (Vos) | 20μV |
| Voltage Gain | 53.98dB |
| Power Supply Rejection Ratio (PSRR) | 110.46dB |
| Sensing Method | High/Low-Side |
| Voltage Gain-Nom | 500 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
INA284AIDR Overview
Buck boost converter is included in the package Tape & Reel (TR).Voltage regulator is packaged in the way of 8-SOIC (0.154, 3.90mm Width).In this case, Surface Mount holds the current regulator in place.Current regulator is recommended that the operating temperature not exceed -40°C~125°C.There is a support for voltages of -14V~80V as input voltages for this voltage regulator.A 8 termination can be defined as a terminating voltage regulator which matches the characteristic impedance of a line, which allows a transmission line to be terminated with a voltage regulator matching its characteristic impedance.Among the INA284 family of products.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. An current regulator such as this one is mounted by Surface Mount.There is a strong/weak growth in the number of channels: 1.The maximum supply voltage of 18V is supported by it.Operational Amplifier is a part that includes these current regulations, all of which are included in one part.As long as the supply voltage is lower than 2.7V, it will operate correctly.This type of FPGA is represented by the Zero-Drift series.This electrical buck boost converter has an amplifier type of OPERATIONAL AMPLIFIER, which is a type of amplifier.In order for it to operate, it requires an operating supply current of 600μA.In a current regulation, 53.98dB voltage gains are the simple ratio between the output voltage and the input voltage.The resistance of this electrical dc to dc converter is 6kOhm (Ω).
INA284AIDR Features
Tape & Reel (TR) package
INA284 family
The maximal supply voltage of 18V
Zero-Drift series
INA284AIDR Applications
There are a lot of Texas Instruments INA284AIDR Current Regulation/Managements applications.
- Transmission controls
- Smart battery packs
- Battery management
- Level translating
- Automotive current measurement
- DC motor control
- DC-to-dc converters
- Industrial applications current measurement
- Current sensing
- Power supply current measurement
