banner_page

INA285AQDRQ1

8 Pin INA285 Current regulatorAutomotive, AEC-Q100 Series -40°C~125°C Min 2.7V Max 18V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-INA285AQDRQ1
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 441
  • Description: 8 Pin INA285 Current regulatorAutomotive, AEC-Q100 Series -40°C~125°C Min 2.7V Max 18V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Series Automotive, AEC-Q100
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
ECCN Code EAR99
Subcategory Operational Amplifier
Terminal Position DUAL
Terminal Form GULL WING
Base Part Number INA285
Function Current Monitor
Max Supply Voltage 18V
Min Supply Voltage 2.7V
Voltage - Input -14V~80V
Accuracy ±0.4%
Amplifier Type OPERATIONAL AMPLIFIER
Common Mode Rejection Ratio 140 dB
Input Offset Voltage (Vos) 20μV
Bandwidth 2 kHz
Sensing Method High/Low-Side
Input Bias Current 25μA
Number of Amplifiers 1
Voltage Gain-Nom 1000
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

INA285AQDRQ1 Overview


In package Tape & Reel (TR), buck boost converter is included.In this case, voltage regulator has been packaged in the same way as 8-SOIC (0.154, 3.90mm Width).This electronic part is mounted in the way of Surface Mount.As a rule of thumb, the operating temperature should not exceed -40°C~125°C.Current regulator is possible to use a voltage of -14V~80V as an input voltage.Current regulator belongs to the family INA285.In a computer or other communication constant current regulator, 8 pins are pronged contacts that provide a signal interface.It is mounted by Surface Mount on this current regulator.The maximum voltage of 18V that can be supplied to the buck boost converter is supported.The current regulations of this part are included in a part that is named Operational Amplifier.In order for it to operate, 2.7V has to be the minimum supply voltage.There are FPGAs of this type in the Automotive, AEC-Q100 series.An amplifying buck boost converter such as this one is a OPERATIONAL AMPLIFIER type amplifying buck boost converter.

INA285AQDRQ1 Features


Tape & Reel (TR) package
INA285 family
The maximal supply voltage of 18V
Automotive, AEC-Q100 series

INA285AQDRQ1 Applications


There are a lot of Texas Instruments INA285AQDRQ1 Current Regulation/Managements applications.

  • Suspension controls
  • Battery management
  • Engine management
  • Motor controls
  • Industrial applications current measurement
  • Transmission controls
  • Over current monitor
  • Automotive current measurement
  • Battery chargers
  • Over-current protection

Write a review

Note: HTML is not translated!
    Bad           Good