banner_page

INA302A2IPW

14 Terminations5V 14 Pin INA302 Current regulator-40°C~125°C


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-INA302A2IPW
  • Package: 14-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 815
  • Description: 14 Terminations5V 14 Pin INA302 Current regulator-40°C~125°C (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mounting Type Surface Mount
Package / Case 14-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 14
Operating Temperature -40°C~125°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 14
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Comparator
Terminal Position DUAL
Terminal Form GULL WING
Supply Voltage 5V
Base Part Number INA302
Function Current Sense
Output Type OPEN-DRAIN
Number of Channels 2
Voltage - Input 0V~36V
Supply Current-Max 1.1mA
Response Time 1250 ns
Amplifier Type COMPARATOR
Bandwidth 440 kHz
Supply Voltage Limit-Max 6V
Sensing Method High/Low-Side
Input Offset Voltage-Max 50μV
Common-mode Reject Ratio-Min 100 dB
Common Mode Voltage-Max 36V
Height 1.2mm
Length 5mm
Width 4.4mm
Thickness 1mm
RoHS Status ROHS3 Compliant

INA302A2IPW Overview


Buck boost converter is embedded in the Tube package.14-TSSOP (0.173, 4.40mm Width) has packaged voltage regulator in this manner.The current regulator is mounted by Surface Mount.There should be no temperature above -40°C~125°C at the time of operation.Current regulator is possible to use a voltage input of 0V~36V for the input.In addition to the 14 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.Among the INA302 family of products.In computers and other communications constant current regulators, 14 pins are pronged contacts that form part of a signal interface.If a 5VV power source is used as a power source to power the constant current, it should be able to function.Channels are becoming stronger/weaker based on the following statistics: 2.Part Comparator consists of these current regulations as well as other current regulations.This electrical buck boost converter uses a COMPARATOR amplifier type.

INA302A2IPW Features


Tube package
INA302 family

INA302A2IPW Applications


There are a lot of Texas Instruments INA302A2IPW Current Regulation/Managements applications.

  • Suspension controls
  • Diesel injection controls
  • DC-to-dc converters
  • Engine management
  • Vehicle dynamic controls
  • Motor controls
  • Current sensing
  • Over-current measurement
  • Programmable current source
  • Automotive current measurement

Write a review

Note: HTML is not translated!
    Bad           Good