banner_page

INA303A2IPWR

14 Terminations5V 14 Pin INA303 Current regulator-40°C~125°C


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-INA303A2IPWR
  • Package: 14-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 594
  • Description: 14 Terminations5V 14 Pin INA303 Current regulator-40°C~125°C (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mounting Type Surface Mount
Package / Case 14-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 14
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2
Number of Terminations 14
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Comparator
Packing Method TR
Terminal Position DUAL
Terminal Form GULL WING
Supply Voltage 5V
Base Part Number INA303
Function Current Sense
Output Type OPEN-DRAIN
Number of Channels 2
Voltage - Input 0V~36V
Supply Current-Max 1.1mA
Response Time 1250 ns
Amplifier Type COMPARATOR
Supply Voltage Limit-Max 6V
Sensing Method High/Low-Side
Input Offset Voltage-Max 50μV
Common-mode Reject Ratio-Min 100 dB
Common Mode Voltage-Max 36V
Height 1.2mm
Length 5mm
Width 4.4mm
Thickness 1mm
RoHS Status ROHS3 Compliant

INA303A2IPWR Overview


There is a package called Tape & Reel (TR) that contains buck boost converter.Depending on how 14-TSSOP (0.173, 4.40mm Width) packages voltage regulator, voltage regulator will be packaged in the same way.Current regulator is mounted by Surface Mount.A maximum operating temperature of -40°C~125°C should not be exceeded during operation.There is a support for voltages of 0V~36V as input voltages for this voltage regulator.A 14 termination is a method of terminating a transmission line, in which a voltage regulator is used that matches the impedance of the transmission line in order to terminate the line with a 14 termination.In the INA303 family, current regulator is a member.There are 14 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. If a 5VV power source is used as a power source to power the constant current, it should be able to function.In terms of channel number, I would say that it is growing strongly/weakly: 2.In this case, these current regulations are included as part of a part called Comparator.An amplifier of this type is COMPARATOR.

INA303A2IPWR Features


Tape & Reel (TR) package
INA303 family

INA303A2IPWR Applications


There are a lot of Texas Instruments INA303A2IPWR Current Regulation/Managements applications.

  • Suspension controls
  • Over current monitor
  • Battery management
  • Level translating
  • Battery chargers
  • Automotive current measurement
  • Programmable current source
  • Vehicle dynamic controls
  • Smart battery packs
  • Transmission controls

Write a review

Note: HTML is not translated!
    Bad           Good