INA321E/250G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 25.996513mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 10 TΩ |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | INA321 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 3 |
| Number of Channels | 1 |
| Operating Supply Current | 40μA |
| Nominal Supply Current | 60μA |
| Quiescent Current | 40μA |
| Slew Rate | 0.4V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 0.5pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 500 kHz |
| Gain Bandwidth Product | 500 kHz |
| Voltage Gain | 60dB |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 7.5V |
| Voltage - Input Offset | 200μV |
| -3db Bandwidth | 0.5MHz |
| Voltage Gain-Nom | 25 |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA321E/250G4 Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. This is a Instrumentation type op amp. A Tape & Reel (TR) case is used for delivering the op amp. There have been a total of 8 terminations over the past year. A total of 8 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 5V battery. A total of 8 pins are present on the instrumentation amplifier. The input offset voltage is 500μV. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, op amp ranges -55°C~125°C. Using an 40μA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 60dB at all times. There are a total of 1 channels available on the op amps. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The buffer op amp is rated for an operating voltage of 3 when it comes to the power supply. For the packing of the instrumentation amplifier, TR is adopted. There is an 40μA quiescent current in linear amplifier. It is important to keep the resistance within the 10 TΩ range of the linear amplifier.
INA321E/250G4 Features
8 Pins
supply voltage of 5V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 10 TΩ
INA321E/250G4 Applications
There are a lot of Texas Instruments INA321E/250G4 Instrumentational OP Amps applications.
- Hand-held batteries
- Wireless base stations
- Strain gauges
- Non-polarized electrodes
- Video computer boards
- Tablets
- Portable electronic products powered by batteries
- High-frequency data acquisition systems
- Computer workstations
- Cinema or auditorium audio system
